Top 15 Best PEX Crimp Tools in 2020

Top 15 Best PEX Crimp Tools – Guide & Reviews 2020

PEX crimp tools are used on XPE, PEX or XLPE pipes and electrical cables. The abbreviation XPE, PEX or XLPE stands for Cross-linked polyethylene which is a type of polyethylene plastic with cross-links. This organic polymer is used in building hydroponic radiant cooling and heating systems, services pipe works, insulation of high-tension electric cables, and domestic water pipes.

To choose a premium PEX crimp tools you need to understand the material the tubing is made of. There is a misconception that PEX-A, PEX-B, and PEX-C are a grade of PEX. These letters identify the manufacturing process. They also do not indicate the performance rating or quality of the tubing.Top 15 Best PEX Crimp Tools in 2020

The PEX-A is manufactured using the Peroxide method. The PEX-B is made using the Silane method and PEX-C is made using the Irradiation method.

Read our latest guide about the best garage stools.

These tubings adhere to the same standards such as minimum bending radius, pressure, and temperature ratings. The thickness of the pipe walls and ID and OD dimensions are also fixed by the SDR9 dimensional standard. They also comply with ASTM F876 and ASTM F877 standards. Thus, they can be used anywhere in the USA using PEX crimp tools and fittings.

Read our complete guide about the best tire repair kits.

The advantages of PEX tubings are as follows;

PEX-A is the most flexible and soft of all types of tubings. They have the highest number of cross-links and have no coil memory. The kinks can be straightened out using a heat gun.

PEX-B has the highest oxidative and chlorine resistance. They have the lowest dimensional tolerances and highest bursting pressure.

PEX-C is softer than PEX-B with no or little coil memory. The manufacturing process is more eco-friendly, too.

PEX-A and -B are preferred for open-loop heating systems, hot and cold plumbing as they are resistant to cracking, oxidation, and bursting in extreme temperature variations. The pipe should meet the ANSI/NSF372 and ANSI/NSF61 standards for potable water. The water should be tasteless, odorless, and lead-free.

These pipes are marked with an “NSF-61-G”, “pw-G” or other NSF-approved markings. The tubing should be imprinted with ASTM F2023 compliance when used with chlorinated water. They are used for radiators, baseboard heating, radiant floor heating, and snow melting. These pipes should meet ANSI/NSF 14 standards and be imprinted with an “nsf-rfh” or the actual standard.

These tubes may be color-coded red, blue, white, and purple. The red stands for hot, blue for cold, white may be Top 15 Best PEX Crimp Tools in 2020neutral and purple for reclaimed water systems. PEX pipes are structurally different, therefore their applications. Pick the best PEX crimp tools according to the tubing you are using.

There are three types of PEX tubing by structure;

Non-Barrier PEX – is a plain extruded pipe without any external coatings or additional layers. This tubing is used in hot and cold-water plumbing. It is used in open-loop hydroponic heating systems. These tubings can be connected by clamping, crimping, cinching, and push to connect methods.

Oxygen Barrier PEX – has an external layer of EVOH polymer indicated by a glossy shine. The tubing meets the DIN 4726 standard for oxygen permeability. These tubings are used in hydroponic, snow melting, and radiant floor heating systems. These tubings can be connected by clamping, crimping, cinching, and push to connect methods.

PEX-AL tubing – has an inner layer of aluminum bonded to two layers of PEX. These tubings are used in hydroponic, snow melting, and radiant floor heating systems. Pick the correct fitting as they can be connected by compression and pressing methods.

PEX resists freeze breakage as the plastic can expand. These tubings are preferred as they are quick to install and durable.

They are very simple to install. Throughout the installation, one needs only a tube cutter that delivers a clean and neat cut. And a crimper with 1/2-inch, ¾-inch, 1-inch, etc. If you happen to make a mistake or want to change the fittings then you need a decrimper.

Types of the Best PEX Crimp Tools

There are four types;

Single size crimp tools – These types of tools make connections of a specific size of PEX tubing. These tools do Top 15 Best PEX Crimp Tools in 2020not require a change of jaws and are sold individually. They range from size 3/8th to 1-inch. Single size crimpers are available in angled and straight versions. The angled crimpers have a shorter handle compared to straight ones. The angle-headed crimp tool head is at 120° from the handles. The advantage of the tool is that you can reach into hard to reach places such as the ceiling or under the sink. The angle headed crimper brings all the leverage needed to secure the connection.

Dual size crimp tools – These are two in one crimp tools by PEX. This 1/2 inch and 3/4-inch tool works with two PEX sizes at the same time. You do not require to purchase different size tools.

For example The Combo crimp tool which is for the most popular sizes – 1/2-inch and 3/4-inch of tubing. The universal crimp tool is mostly used by professional plumbers. It is called universal as the jaws can be interchanged from 3/4th to 1-inch. Another universal crimp comes with a bolt remover. It goes from size 3/4th to 1-inch. All you need to work with this cost-effective option is a bolt remover.

PEX Crimp Tool Kits – include a crimp tool with interchangeable jaws. They are secured in a plastic molded toolbox or case. This kit includes a Go-No-Gauge, a crescent wrench with a hex tool for repair and calibration parts, and how-to crimping instructions. Select kits may include a  decrimper tool.

Decrimpers – is also known as the crimp-ring removal tool. It is used to remove the copper rings used for crimping from the connections. This eliminates the waste of PEX fittings. A decrimping tool is a useful investment for whole-house plumbing and large installations.

Advantages of the Best PEX Crimp Tools

PEX Crimp tools are used to install crimp or barbed PEX fittings. Crimp rings deliver a leak-free connection. These tools and connections are easier to find. The connection can be checked immediately using the go-on go gauge.

PEX crimp tools are compact, lightweight, and easier to handle. They are self-contained and finish the crimp Top 15 Best PEX Crimp Tools in 2020cycles quickly. They are durable and make reliable and neat connections.

PEX crimp tools deliver the accurate amount of power you need for proper crimping. The thicker the wire the more effort the manual crimp tools will require. Thus, hydraulic and ratcheting crimping tools are used. These tools deliver the best quality crimps.

There are crimpers with dies and without dies. Die-less crimpers are faster as you do not require to switch the die each time you make the crimp of a certain size. The benefit of crimpers with dies is that they can be used on a wide range of tube sizes. And they have a less complicated design.

Features on the Best PEX Crimp Tools

Here are the criteria based on which you should select your crimp tools;

The lot size – This refers to the number of crimps to be made and the tool’s runtime. If the crimping is in small batches and far between then handheld crimping tools will suffice. But if you have an industrial operation, ratchet and hydraulic crimping tools are recommended to quicken the work and reduce fatigue.

Crimp profile and tube gauge – You will need the right crimp profile to get the best crimp on a certain gauge of the tube. Some tools have interchangeable jaws to fit a wide range of gauge sizes. This relation has been standardized by the SDR9 dimensional standard.

Quality of construction – This refers to the quality of the tool and crimps it will produce over the runtime.

Expected life cycle – of the tool and its parts. If the tool and its parts such as the dies, handles, and levers are made of high-quality materials they will last longer.

Guarantee of spare parts supply – Your tools deliver only when you maintain them. This requires the regular Top 15 Best PEX Crimp Tools in 2020and easy supply of spares such as dies. The model should not go out of production for at least 5 years.

Technical specifications – The tools should match the technical specifications and standards of the tubing, rings, connectors, etc. This is necessary for the crimp tools with dies or without dies to do their job correctly.

Documentation – The instructions and manual with the crimp tool kit should carry clear diagrams and instructions. The parts of the tool should be labeled and the dies should be numbered. This will help the efficient use of the tool.

Adjustments – The crimp height should be adjustable.

Special-Purpose Solutions – for professionals such as electricians. The kit should include special crimping tools for electrical applications such as circlip pliers for fitting snap rings, punch pliers, etc.

FAQs

How do you adjust the PEX crimping tool?

A Go, No-Go pin gauge is used to calibrate the crimping tool. One end of the gauge should fit in the closed die of the crimping tool while the other should not.

What is PEX crimping and clamping?

PEX crimps and clamps are used to install fittings. A clamp ring is compressed around the tubing to make the connection. A single clamp works on many pipe sizes. But a of a crimp od a certain size is compressed around the mouth of the tubing holding the fitting.

What is a PEX clamp tool?

These tools have comfortable handles and a ratcheting mechanism. The tool has pincer-like jaws that compress the clamp ring on the tube until there is a secure connection. This tool does not release until the ring is completely fastened.Top 15 Best PEX Crimp Tools in 2020

How to crimp and decrimp a PEX tube?

The first time you are making a crimp connection ensure you have a smooth and even cut on the tubing. To do this take the PEX cutter and cut 90°. Then take the crimp ring and slide onto the tubing. Next, pick the fitting you want and slide it into the mouth of the tubing to about 1/8th of an inch. Then take your crimp tool, place it at 90° and compress. This makes a connection. You get a C-shaped tool – the go-no-go tool – place it on the crimp to ensure your connection is accurate. If you realize the connection is not correct or you have put a wrong fitting. Use a decrimping tool. You will have to cut the tubing. Then take the decrimp tool insert it in the cut end and press. It cuts through the copper ring and the fitting is released.

Top 15 Best PEX Crimp Tools in 2020

ImageProduct NameKey FeaturesRating
1. IWISS IWS-FA Crimping Tool Kit4 jaw sizes in 1 tool4.7

2. SharkBite 23100

Interchangeable jaw dies4.6
3. Zurn QCRTMH Reliable steel construction 4.6
4. IWISS IWS-C Angled PEX Combo Crimp Kit Lightweight composite handles4.5
5. iCrimp Combo PEX Pipe Crimping Tool Meet ASTM F1807 Standard4.5
6. Conbraco Apollo 69PTKH0015K Interchangeable heads4.4
7. SharkBite 23251 For commercial and residential4.4
8. CAMWAY CAMGT223CAV Easy to Use4.4
9. iCrimp CRP961 Durable high-quality steel 4.3
10. KOTTO PEX Crimping Set Easy to switch cinch4.3
11. SENTAI KG1096 Fixes stainless steel clamps4.2
12. Apollo PEX 69PTKG1096 Sturdy tool4.1
13. JWGJW 002 Ergonomic handle4.1
14. WATTS PEX WPCCT-6 Meets ASTM 2098 specification4.0
15. GDHXW Cinching Tool Labor-saving design3.9

1. IWISS IWS-FA Crimping Tool Kit

This is a complete tool kit for 3/8-, 1/2-, 3/4- and 1-inch PEX tubings. The kit includes a pipe cutter, a go-on go IWISS IWS-FA Crimping Tool Kitgauge, and a removal tool. The kit meets all US F1807 standards.

Materials & Design

IWISS IWS-FA Crimping Tool Kit is an all-in-one PEX tool kit that meets ASTM F1807 standards for 3/8-inch, 1/2-inch, 3/4-inch, and 1-inch PEX tubings. The crimp tools are made of high-quality carbon steel. The handles of the crimper are covered in an ergonomically designed plastic cover. There are striations on the handle for a comfortable and better grip. The jaw of the crimper fits a 1-inch PEX pipe. There are dies to reduce the circumference to fit PEX tubings of 3/4-inch, 1/2-inch, and 3/8-inch gauge. There is a PEX cutter to prepare the tubing for the installation or removal of a fitting. The kit includes a ring removal tool that cuts through the copper ring to remove the fitting. And there is a go-on go gauge that not only helps you calibrate the crimp tool but also tests if the fitting is correctly installed.

Functionality & Comfort

IWISS IWS-FA Crimping Tool Kit includes a crimper with three dies, a PEX cutter, a ring remover, and a gauge. This is a versatile tool kit that is easy to use. The crimper has interchangeable jaws to deliver an adjustable crimp force. To change the dies in the jaws, push the screw upwards to position the dies. Though the tool is factory calibrated, it has an adjustable dial for flexible use. All the tools in the kit are lightweight and have an ideal length to do the job. The crimper, the cutter the gauge is designed such that you can reach into tight workspaces. And they will work as an extension of your arm. The ergonomic handle with a comfortable grip minimizes user fatigue. The crimp tool accepts 3/8, 1/2- and 3/4-inch crimp rings or dies. The crimper can fasten the standard PEX pipe to brass or poly fittings using copper rings. This precision tool has a perfect locator and polished pressing jaws. The tool is finely made to ensures there is no damage to the PEX tubing or copper rings.

Tool Specifications

IWISS IWS-FA Crimping Tool Kit has a cutter, crimper, decrimper, and a gauge. The spring-loaded cutter had a maximum capacity of 1-inch. It is 7.87 inches long and 0.14kg. The crimper can be fitted with 3/8, 1/2- and 3/4-inch jaws. It is 15.5 inches long. The ring removal or decrimping tool has a capacity of 1/2, 3/4, and 1-inch copper rings. It weighs 0.86 pounds and is 9.45 inches long. The go-on go gauge is calibrated to 3/8, 1/2, 3/4 and 1-inch to measure the crimps.

Additional Features

IWISS IWS-FA Crimping Tool Kit consists of a 1-inch Crimping Tool, 3 Jaws (3/8-inch, 1/2-inch & 3/4-inch), and an iCrimp Pex Cutter. The plastic molded case also carries a GO NO GO gauge and a wrench. The toolset is supported by a 1-year warranty.

Highlights

  • Suitable for All US F1807 Standard fittings
  • Precision jaws for leak-free connections
  • 4 jaw sizes in 1 tool
  • Carbon steel construction

2. SharkBite 23100

Brings you the technology of efficient plumbing. The brand’s solutions work across a wide range of applications. SharkBite 23100These are appropriate solutions for construction, remodeling, re-piping, repair work, and water heating solutions.

Materials & Design

SharkBite 23100 set has a crimp tool with three changeable dies. Without the die, the jaw has a circumference of 1 inch. There is a nut to fit the 3/4-inch, 1/2 inch, and 3/8-inch circumference. The tool helps in quick crimping. There is no need for glue or welding and cooling of joints. After the joint has been made using the accompanying go-no-go gauge to verify if the connection has been made securely. The tool is made of high carbon steel. The handles are fitted with plastic handles that help better the use of the tool.

Functionality & Comfort

SharkBite 23100 kit consists of the crimp tool, three dies, and go-no-go gauge. The benefit of using the crimp tool and crimp rings is that there is no use of soldering, glue, or solvent required to make connections. Cold welding prevents the leakage of dangerous chemicals in the plumbing systems. The cold welding also prevents the open flame in the house which may be a fire hazard. There is no risk of the pipe popping and copper traces leaking into the water. A crimp tool is a versatile tool that has interchangeable dies that can be fitted onto the 1-inch circumference. The jaws can be used on 3/4-inch, 1/2 inch, and 3/8-inch tubing besides the 1-inch ones. The PEX tubing and crimp tools can be used to construct dependable and cost-effective systems.

Tool Specifications

SharkBite 23100 crimp tools jaws deliver 5000 pounds of crimping force. The handle is 6 inches long. The inter-changeable jaw dies are 3/8 inches, 1/2 inches, and 3/4 inches.

Additional Features

SharkBite 23100 Kit consists of the crimp tool, with interchangeable jaws of 1 inch, 3/4-inch, 1/3 inch, and 3/8-Inch there is a Go-No-Go Gauge and a 25-year warranty.

Highlights

  • High carbon steel
  • Interchangeable jaw dies
  • Go-no go gauge
  • 5000 pounds of crimp force

3. Zurn QCRTMH

This crimp tool has a multi-head crimp tool to fit the copper crimp rings. The crimp tool helps fix 3/8-inch, 1/2-Zurn QCRTMHinch, 5/8 inch, and 3/4-inch rings and fittings.

Materials & Design

Zurn QCRTMH kit contains a crimping tool with three interchangeable dies. The kit contains a decrimping tool, an Allen key, and a spanner. The metal parts are made of high carbon steel. The tools are designed to handle the ASTM F1807 copper rings. The manually operated tool can be fitted with crimp jaws of 3/8 inches, 1/2 inches, 5/8 inches, and 3/4-inch crimp dies. There is a go-no-go tool that lets you check the connection after the fittings have been installed.

Functionality & Comfort

Zurn QCRTMH is a multi-head crimp tool. It is used for the quick installation of copper rings of varying sizes. The changeable die jaws range from 3/8 to 3/4 inches. There is a de crimping tool in case you want to replace the ring or the fitting. The tool kit can be used with traditional crimp rings and QickCap rings with a positioning end cap. The setup of the copper ring, the PEX tubing, and fitting may slip my making the crimp. Thus, QickCap rings were developed. They hold the copper crimp ring in place at the ideal distance to compress the crimp around the barbs of the fittings. The tubing diameter of up to 1-inch the gap between tubing and crimp ring should be 1/8 to 1/4 inches. For tubing diameter of 1.25 – 1.5 inches the gap between the tubing and crimp ring should be 1/4 to 3/8 inches. The tube diameter of 2 inches should have a gap of 3/8 to 1/2 inch. The tools are of durable construction to withstand tough environments. It is used on potable plumbing systems, high and freezing resistant PEX tubing systems also.

Tool Specifications

Zurn QCRTMH kit has a crimper, a decrimper, and a gauge compatible with 1/2-inch, 3/4-inch,3/8 inch, and 5/8-inch PEX tubing.

Additional Features

Zurn QCRTMH kit is supported by a 25-year warranty.

Highlights

  • 5 tools in the kit
  • Carbon steel
  • Includes crimp removal tool
  • Nested polymer case

4. IWISS IWS-C Angled PEX Combo Crimp Kit

This kit includes a 1/2 inch and 3/4-inch angle-head PEX crimp tool. There is a PEX cutter a go-no-go gauge and IWISS IWS-C Angled PEX Combo Crimp Kitsome copper crimps. The kit complies with the US F1807 Standards.

Materials & Design

Iwiss IWS-C Angled PEX Crimp Kit includes a crimper, a decrimper, PEX cutter, and a gauge. All the tools are made of high-quality steel. They are fitted with a plastic handle with an ergonomic grip. The two angled heads are at 120 that allow easy access into hard to reach places like overhead rafters and under the sink. The crimper, decrimper, and PEX cutter have precise and smooth inside of the jaw. This helps make a clean cut at 90. There is a crimper dedicated to 1/2-inch PEX tubes and another to 3/4-inch PEX tubings. These tools meet the ASTM F1807 standards. The PEX cutter is spring-loaded for quick loading and cutting. There is a lock hook to keep the jaws closed while carrying the tool. The light tool is made of aluminum alloy fitted with a steel blade. The cutter can handle tubing from 1/8 to 1 inch.

Functionality & Comfort

Iwiss IWS-C Angled PEX crimp Kit has two crimpers (1/2 inch and 3/4 inch), decrimper, PEX cutter, and a go no go gauge. The crimpers have a smooth actuation mechanism that allows smooth connections while applying minimal force. The tool has a comfortable grip that makes PEX installation smoother. The kit is ideal to use while setting crimp connections in a potable water system. It can be used while setting up an ice rink or snowmelt or radiant heat system besides other applications. The labor-saving design is made precisely to prevent ring distortion. The PEX cutter has a razor-sharp blade with a ratchet mechanism that can even cut PVC and rubber pipes up to 1- 5/8-inch diameter. The go no go gauge also helps verify the crimp is correctly set.

Tool Specifications

Iwiss IWS-C Angled PEX crimp Kit consists of two angled cutters of 1/2 inch and 3/4 inch. There is a decrimper that can handle tubings from 5/8th to 1 inch wide. The PEX cutter works on 1/8 – 1-inch PEX tubings.

Additional Features

Iwiss IWS-C Angled PEX crimp Kit is supported by a 1-year warranty.

Highlights

  • Two single tools – 1/2 & 3/4 inch
  • Angled head
  • Carbon steel
  • Ergonomic design

5. iCrimp Combo PEX Pipe Crimping Tool

This is an IWISS TOOLS IWS-1234PS tool from the iCrimp series by IWISS. This tool has a 1/2-inch and 3/4-inch iCrimp Combo PEX Pipe Crimping Toolsize dies to crimp PEX pipes. There is a go-no-go gauge to verify the correct installation.

Materials & Design

iCrimp Combo PEX Pipe Crimping Tool by IWISS meets the ASTM 1807 standards. It is compatible with any brand of copper rings that meet these standards. The tool has a well-polished jaw that ensures no damage comes to the PEX copper ring. There is a calibration function to ensure you can use the tool for a long time. Though the factory-calibrated the adjustment dial allows you to calibrate the tool just in case. The tool has a durable construction and made of steel. The shorter handle and lighter material ensure the same mechanical pressure as long handle tools.

Functionality & Comfort

iCrimp Combo PEX Pipe Crimping Tool is shorter and lighter. This upgraded handle brings you dexterity in narrow spaces. When the tool is completely open it improves performance even in congested spaces. This redesigned tool has a new function – the precrimp. This function prevents the crimp from slipping. Prop the holder and precrimp the copper rings. This prevents the copper ring from sliding while installing. This function applies to 1/2 and 3/4 inch rings. You can even correct the deformed 3/4 inch rings.

Tool Specifications

iCrimp Combo PEX Pipe Crimping Tool can be used on 1/2 inch and 3/4 inch PEX tubings. The tool is 8.07 inches long and weighs 2.6 inches.

Additional Features

iCrimp Combo PEX Pipe Crimping Tool is supported by a 5-year warranty.

Highlights

  • Professional
  • Durable
  • Lightweight
  • Effortless to use

6. Conbraco Apollo 69PTKH0015K

This is a 4-in-1 kit with a multi-head. This straight crimp tool has 4 removable and adjustable crimp heads. There Conbraco Apollo 69PTKH0015Kis a go-no-go tool to check the correct setting of the crimp.

Materials & Design

Conbraco Apollo 69PTKH0015K aka as the Apollo PEX crimp toolset is a four in one. It includes a crimp tool, a go-no-go gauge, and jaws of 3/8, 1/2, 3/8, and 1 inch. You can set copper crimps of 3/8-inch (Catalog Id: 40655845) 1/2-inch (Catalog Id: 40655856), 3/4-inch, and 1-inch (Catalog Id: 40715286). The jaws can be changed or their crimp force adjusted using a wrench. There is a go no go gauge that can be used to check if there has been uniform compression of the ring for a leak-free joint.

Functionality & Comfort

Conbraco Apollo 69PTKH0015K has interchangeable heads. With the handles open press the side release spring upwards. The hook should rise above the jaw pin. Slide the jaw out and remove it. Now press the slide release spring upwards. Slide the new jaw into place and then release the spring. To place the crimp cut the tube squarely. Slide the crimp ring over the tubing end and hold it 1/8 to 1/4 inch from the end of the tubing. Place the crimp tool over the ring and press with a uniform force. Then check with the go no go gauge. If the ring slides into the gauge it is a go.

Tool Specifications

Conbraco Apollo 69PTKH0015K tool is 17.75 inches by 9.5 inches by 6.25 inches and weighs 2.1 inches.

Additional Features

Conbraco Apollo 69PTKH0015K kit includes crimp jaws of 3/8 inch, 1/2-inch, 3/4 inch, and 1 inch. There are a Go-No-Go gauge and a wrench. The kit is supported by a 5-year warranty.

Highlights

  • Interchangeable heads
  • Toughened steel
  • Precision jaws
  • Ergonomic handle

7. SharkBite 23251

This is a two in one tool that can be used on 1/2 inch and 3/4-inch PEX tubings and barb fittings.SharkBite 23251

Materials & Design

SharkBite 23251 tool is evidence that the brand is particular about quality and detail. This two in one tool has two circular dies built into the jaws. The one on top is to fit 1/2-inch PEX tubing crimps while the lower one is wider for 3/4-inch fittings. There is a light composite handle that reduces fatigue. The tools are factory calibrated and meet the ASTM F1807 standards.

Functionality & Comfort

SharkBite 23251 tools are built to make precise connections. They connect fittings such that they can withstand a pressure of 200 PSI and tolerate temperatures as high at 200F. The tool can be used on a great variety of connectors such as PE-RT Pipe, CPVC, Copper, and PEX pipes. The quality of these tools has been tested by making over 550 million connections. They also make the only push to connect fittings that ensure you get a leak-free connection.

Tool Specifications

SharkBite 23251 crimp tool has two built-in dies of 1/2 and 3/4 inches. The tool is 16.75 inches by 5 inches by 1.5 inches in dimensions. It weighs 3.15 inches.

Additional Features

SharkBite 23251 kit includes the 2 in 1 tool and a go-on-go gauge. The tool is supported by a 2-year warranty.

Highlights

  • 2 in 1 tool
  • Professional tool
  • Meets ASTM F1807 standards
  • High carbon steel

8. CAMWAY CAMGT223CAV

This is a crimping tool paired with a PEX cutter and 50 pieces of clamps. These are stainless steel clamps of 1/2 CAMWAY CAMGT223CAVinches and 3/4 inches.

Materials & Design

CAMWAY CAMGT223CAV kit meets the ASTM 2098 standard for PEX cinching tool. The tool is used on stainless steel clamps to make PEX connections between 3/8 – 1 inch. This all in one kit has a cinch tool a PEX cutter, 30 pieces of 1/2-inch clamps and 20 pieces of 3/4 inch clamps. The PEX crimp tool has a ratcheting design that makes it easy to loosen and tighten the clamps. The tools are factory adjusted but can be re-adjusted without tools. The tools are made from high-quality steel and forged into to hold the mechanical properties for life.

Functionality & Comfort

CAMWAY CAMGT223CAV kit finds wide application in constructing pipelines over and under the ground. The tools are easy to use as the versatile PEX cinch tool can be used to tighten clamps. The cutter can be used to install PEX tubes and cut out the fittings in case of a mistake. The stainless-steel clamps can be removed using a screwdriver. The tool is made of steel and fitted with an ergonomic handle.

Tool Specifications

CAMWAY CAMGT223CAV kit can make PEX connections using 3/8- to 1-inch clamps. The tool is 12.6 inches by 7.48 inches by 0.91 inches. It weighs 2.2 pounds.

Additional Features

CAMWAY CAMGT223CAV kit contains the PEX cinch tool, a PEX cutter, a Calibration Tool, 30 pieces of 1/2 inch hose clamps, and 20 pieces of 3/4 hose clamps. The unit is supported by a 2-year warranty.

Highlights

  • Economical
  • Versatile
  • Value for money
  • Easy to use

9. iCrimp CRP961

This is an IWISS sub-brand. The kit consists of a crimp tool, a cutter, 20 pieces of 1/2 inch clamps and 10 pieces of iCrimp CRP9613/4 inch PEX clamps.

Materials & Design

iCrimp CRP961 kit is an innovative design. This cinch tool has a shorter handle and lighter weight. The design makes the cinch easier with 25% less effort. This is a one-piece ratchet mechanism that makes cinching a two-step process. The reliable construction and durable superior quality steel lend to the mechanical properties of the tool. This ergonomically designed tool has comfortable TPR handles. The tool has a comfortable radian design and human engineering principle. The tool is compatible with ASTM F2098 standards. The stainless-steel clamps with a single ear hose clamp for yacht and truck.

Functionality & Comfort

iCrimp CRP961 kit has a crimping tool that has grooves in the joints. They are constructed with a metal plating to provide higher strength. The top has a reasonable slope design in the head cinch the clamps better and more secure. There is an excellent one-piece ratchet mechanism with large teeth. It lends solid support and reduces the shaking while sending strength to the clamping. The tool released automatically when the clamp is closed fully.

Tool Specifications

iCrimp CRP961 kit has a crimping tool that is 9.05 inches long and weighs 1.06 pounds. The PEX cutter is 7.87 inches long and weighs 0.33 pounds. It can cinch from 3/8 to 1-inch cinches.

Additional Features

iCrimp CRP961 kit has a crimper, PEX cutter, 1/2 inch, and 3/4-inch steel clamps. The tool has a 1-year warranty.

Highlights

  • Stainless steel
  • two in one cinch tool
  • Saves 25% labor
  • Applicable to two size PEX sizes

10. KOTTO PEX Crimping Set

The brand brings you a new design of a tool for cinch clamps. The kit has a pipe cutter along with a calibration KOTTO PEX Crimping Settool and two sizes of clamps. The kit is ASTM 2098 standard compliant.

Materials & Design

KOTTO PEX Crimping Set meet and exceed ASTM 2098 standard. This PEX crimp tool is meant to fit steel clamps ranging from 3/8 inches to 1 inch. This multi-functional tool tightens cinch clamps while the PEX cutter helps remove and re-install the clamps. The tool helps to switch the cinch. The ratchet design and a self-releasing mechanism that makes installing the cinch easy. The tool is factory adjusted and does not require calibration. This 5 in 1 tool can install 3/8-, 1/2-, 5/8-, 3/4- and 1-inch stainless steel clamps. You don’t even have to adjust the tool while switching the clamp size.

Functionality & Comfort

KOTTO PEX Crimping Set has a clamping tool that has a factory adjusted and does not require any additional calibration or adjustment. The tool is made of special manganese steel that has been oil-hardened. This gives durability, better precision, and lifelong usage. The handles are comfortable due to the rubber coating. The handles are 20% longer which saves 30% labor. The ratcheting and self-releasing mechanism for better crimping.

Tool Specifications

KOTTO PEX Crimping Set has a crimper that is 15.5 inches long, the PEX cutter is 8.3 inches long. The kit contains 20 pieces of 1/2 inch clamps and 10 pieces of 3/4 inch clamps. The kit weighs 2.1 pounds.

Additional Features

KOTTO PEX Crimping Set includes the cinch crimp tool with a red handle. There is a red pipe cutter, 20 pieces of 1/2 inch clamps, and 10 pieces of 3/4 inch clamps. The kit is supported by a 1-year warranty.

Highlights

  • Stainless steel
  • 5 in 1 tool
  • Meets ASTM 2098 standard
  • Storage bag

11. SENTAI KG1096

This is a PEX crimp tool with a ratcheting mechanism. The crimping tool fits stainless steel clamps ranging fromSENTAI KG1096 3/8 to 1 inch. There is a go-no-go gauge to check the installed crimps. The crimp tool is compatible with many PEX clamps and PEX tubing from all brands in the USA.

Materials & Design

SENTAI KG1096 is a plumbing tool that helps fit the PEX clamps made of stainless steel. The tool is factory adjusted and does not require calibration or adjustment. The tool meets ASTM F2098 stainless steel clamps from any standard manufacturer. The tool works with clamp sizes 3/8-inch, 12-inch, 5/8-inch, 3/4 inch, and 1 -inch. There is a go no go gauge that allows you to check a good clamp connection.

Functionality & Comfort

SENTAI KG1096 crimp tool is factory adjusted and does not require any more calibration on your part. The tool is made of oil-hardened manganese steel. This is high precision and durable tool honed for life long use. The clamping tool has a comfortable rubber-coated handle that is 20% longer. This converts to 30% lesser work pressure.

Tool Specifications

SENTAI KG1096 has a crimping range of 3/8 to 1 inch. The tool is 14.3 inches by 8.2 inches by 1.3 inches. The tool weighs 2/2 pounds.

Additional Features

SENTAI KG1096 kit has a cinch clamp tool that is supported by a one-year warranty.

Highlights

  • Fixes stainless steel clamps
  • Factory calibrated
  • Ratcheting mechanism
  • Oil hardened manganese steel

12. Apollo PEX 69PTKG1096

This tool will fit three sizes of clamps. It is an ideal tool to install PEX plumbing and heating projects. The tool is Apollo PEX 69PTKG1096light and strong.

Materials & Design

Apollo PEX 69PTKG1096 is a clamping tool that fits the PEX Quick-Cinch clamping tool. It is compact, lightweight, and easy to handle. It is self-contained and finish the clamping cycles quickly and makes reliable and neat connections. The tool fits 3 sizes of stainless-steel crimping rings. The ratcheting mechanism does not release until the clamp is fastened. The tool meets and exceeds the ASTM 1807 standards and exerts 100 pounds of clamping pressure. There is a calibration gauge and a bar tool is included. The tool can be recalibrated when required.

Functionality & Comfort

Apollo PEX 69PTKG1096 is a very durable stainless-steel tool It is used to compress steel clamp rings around barb fittings to make a watertight seal. The tool has a ratcheting mechanism that does not release until the connection is properly secured. The tool is factory calibrated to make all the connections meet the ASTM f2098 standards. These connections are used in building hydroponic systems, radiant cooling and heating systems, services pipe works, insulation of high-tension electric cables, and domestic water pipes.

Tool Specifications

Apollo PEX 69PTKG1096 tool is compatible with 1/2-inch, 3/4 inch, and 3/8-inch clamps. The tool is 15.25 inches by 5.5 inches by 6.5 inches. It weighs 1.5 pounds.

Additional Features

Apollo PEX 69PTKG1096 tool is supported by a 1-year warranty.

Highlights

  • Great value for money
  • Sturdy tool
  • Easy to use
  • Excellent clamping

13. JWGJW 002

This is a PEX clamp cinching tool that can crimp stainless steel clamps of size 3/8 to 1 inch. The kit consists of 22 JWGJW 002pieces of 1/2 inch clamps and 10 pieces of 3/4 inch clamps.

Materials & Design

JWGJW 002 has a ratcheting mechanism that releases only when the clamping is completed. This cinch and remove PEX tool are made of high-quality durable steel. The forging process lends the tool additional strength and mechanical properties to make it last a long time. The factory-calibrated tool does not require calibration but in case – there is a nut on the tool that can be adjusted. The tool has a handle that is 20% longer that requires 30% lesser mechanical pressure to tighten the clamp.

Functionality & Comfort

JWGJW 002 tool comes with 1/2 inch and 3/4-inch clamps. To install cut the PEX tubing squarely leaving an even edge. Then slip the stainless-steel cinch clamp over the tubing. Next, slip the tubing onto the fitting. Then use the cinch tool to close the ear of the clamp. They will auto-release only when the clamp is fully engaged. Then pressure-test the tubing and inspect before use. There will be a slight gap after the clamping and some amount of spring back is expected. To remove the clamp open with a screwdriver or grip the band with a pair of pincers and pullover the ear.

Tool Specifications

JWGJW 002 clamping tool is compatible with 3/8-inch, 1/2-inch, 5/8-inch 3/4 inch, and 1-inch clamps. The tool is 11 inches by 3.15 inches by 0,4 inches in dimensions. It weighs 1.45 pounds.

Additional Features

JWGJW 002 Crimping Tool comes with 22 pieces of 1/2-inch clamps and 10 pieces of 3/4-inch clamps. The unit is supported by a 1-year warranty.

Highlights

  • Ratcheting and self-release mechanism
  • Oil hardened steel
  • Ergonomic handle
  • Factory calibrated

14. WATTS PEX WPCCT-6

This is a PEX cinch clamp with a ratcheting mechanism. It comes with a holster and adjustable wrenches. The toll WATTS PEX WPCCT-6is designed for water PEX and cinch clamps. It will fasten the Watts steel cinch clamps ranging from 3/8 to 1 inch. The tool can be used with one hand and in minimal spaces.

Materials & Design

WATTS PEX WPCCT-6 is a ratcheting cinch tool that can clamp all sizes of stainless-steel cinch clamps. The process can be completed with one hand thanks to the ratcheting non-release mechanism. You may require both the hands to install 1-inch clamps. You may need to squeeze the tool until the indicator window shows that the connection has been completed. There is a quick-release knob. The tool comes with a holster and adjustment tools.

Functionality & Comfort

WATTS PEX WPCCT-6 tool works with a wide range of cinch clamps. The ratcheting tool is designed to install WaterPEX and cinch clamp connections. These connections can be made using the brass and poly-alloy crimp fittings by the brand. They also make cross-linked PEX pipes. The tool is factory calibrated but it is accompanied by a calibration gauge. There is an adjustment screw on the tool. The tool has a release lever and a view hole to check if the cinching is complete.

Tool Specifications

WATTS PEX WPCCT-6 cinch clamp tool works with 1⁄2-, 5⁄8-, 3⁄4-, 1-inch cinch clamps. The tool is 10.7 inches by 6.6 inches by 2 inches in dimensions.

Additional Features

WATTS PEX WPCCT-6 tool is accompanied by a gauge pouch with a holster, an Allen wrench, and a gauge. The unit is supported by a 1-year warranty.

Highlights

  • Meets ASTM F2098 standards
  • For 3/4 to 1-inch cinch clamps
  • Comes with a holster
  • One-hand operation

15. GDHXW Cinching Tool

This is a PEX cinching tool with a removal function. The tool can be used with 3/8 – 1-inch stainless steel clamps. GDHXW Cinching Toolthe cinching tool is accompanied by a PEX cutter, 20 pieces of 1/2 inch clamps, and 10 pieces of 3/4 inch clamps. You are ready to go to work with this kit.

Materials & Design

GDHXW Cinching Tool has a ratcheting mechanism that releases only when the clamping is completed. This cinch and remove PEX tool are made of high-quality durable steel. The forging process lends the tool additional strength and mechanical properties to make it last a long time. The factory-calibrated tool does not require a reset. But in case – there is a lever on the tool that can be adjusted.

Functionality & Comfort

GDHXW Cinching Tool comes with 1/2 inch and 3/4-inch clamps. To install cut the PEX tubing squarely leaving an even edge. Then slip the stainless-steel cinch clamp over the tubing. Next, slip the tubing onto the fitting. Then use the cinch tool to close the ear of the clamp. They will auto-release only when the clamp is fully engaged. Then pressure-test the tubing and inspect before use. There will be a slight gap after the clamping and some amount of spring back is expected. To remove the clamp open with a screwdriver or grip the band with a pair of pincers and pullover the ear.

Tool Specifications

GDHXW Cinching Tool is compatible with 5 types of clamps – 3/8-inch, 1/2-inch, 5/8-inch 3/4 inch, and 1-inch size. The tool is 11.9 inches by 3.6 inches by 2 inches in dimensions. It weighs 2.05 pounds.

Additional Features

GDHXW Cinching Tool comes with 20 pieces of 1/2-inch clamps and 10 pieces of 3/4-inch clamps. The unit is supported by a 1-year warranty.

Highlights

  • Made of carbon steel
  • Compatible with all brands of clamps
  • Labor-saving design
  • Meets ASTM F2098 standard

Leave a Comment

Your email address will not be published. Required fields are marked *