Top 12 Best Garage Floor Coatings – Buyer’s Guide 2020

Garage floors have to be tough and durable. But that does not mean that you have to put up with bare concrete. There are several options for a garage floor coating that will pass the toughness test while having visual appeal too. Investing in a really attractive garage floor will accomplish two things – you will create a truly functional extra room and you will have increased the resale value for your home. Here are some options and ideas to consider to enhance your property’s value.

Types of Garage Floor Coatings

There are two types of garage flooring – coatings and coverings. The example of coatings is the epoxy coating, Top 12 Best Garage Floor Coatings in 2020concrete stain, etc. The examples of coverings are snap-together tiles, floor mats, etc. If your garage floor is smooth, leveled, and well-made then you can cover it either of the above-mentioned options.

If the floor has cracks, pockmarks, stains, etc. then it is best to cover the damage using the tiles or mats. This is because the coatings tend to highlight blemishes. Meanwhile, coverings are immune to peeling and other moisture-related problems.

Garage floor coatings include epoxy paints, floor paints, stains, and sealers. These coatings cost less than coverings and you can apply them yourself. They protect the floor from stains, moisture penetration, and corrosive chemicals like road salt, etc.

The coating can fail due to incorrect and incomplete floor preparation and damp concrete. These coatings cannot be used on surfaces where moisture rises out of the ground or the surface is consistently damp. The coating delaminates flakes and chips thus it is imperative to test the paint on a slab before you apply it on the entire floor.

Coatings require several hours of floor preparation. You have to degrease the floor by applying detergent, solvents, degreasers, and pressure washer. If you are applying a new coat then the sealer and paint from the previous coat have to be removed. Then the holes, cracks, and other surface issues have to be corrected. Next muriatic acid is applied to leave the surface clean and penetrable.

Floor paints are of two types – oil-based and latex versions. Concrete floor paints Top 12 Best Garage Floor Coatings in 2020are tougher versions of wall paints and are the least expensive of all coatings. You can roll it out like the wall paint too. The benefits are that you can touch up the damaged areas and even recoat the entire floor.

Latex paint is easier to apply and clean compared to oil-based paint. The latex paint brings you a muted, flat, and a low sheen finish while oils dry to a high gloss. You will need to renew the paint as it is vulnerable to chemicals, salts, and conditions typical to a garage floor. Typically renew the coat 1 – 2 years.

Epoxy paints – Most epoxy paints are two-part formulae. These have to be mixed before you roll them on. There are one-part epoxies that are premixed. With proper preparation of the site and application. You will get a floor that is not only tough but also beautiful.

The preparation is critical and you have to work quickly to apply them before the matrix hardens. You can drive on them only after the coat is completely cured. This takes up to a week.  A DIY epoxy kit will bring you sufficient primer or sealer and epoxy to apply one coat of each in an average-sized garage for one car.

For extra durability apply a second coat or apply a finishing coat of urethane sealer. Depending upon the wear reply the coat every 3 – 5 years.

Concrete stains – This is not a coat but a translucent decorative color that soaks into the concrete. It creates a pigmented marbled appearance to resemble natural stone. It is applied in two coats. Once with a sprayer or roller and worked into the concrete using a nylon scrubber.

The stain alone does not protect the concrete. Thus, after it dries, rinse the surface and then apply 1 – 2 coats of urethane sealer. It protects the surface from stains, chemicals, moisture, etc. Depending upon the traffic the floor gets you may need to touch up every 2 years.

Concrete sealers – come on two versions – tinted and clear. Sealers are like floor paints only tougher. They are the least expensive and easy to apply using a roller and brush. They dry to a semi-glossy or clear satin finish depending on the product and tint. They may be solvent-based or water-based.Top 12 Best Garage Floor Coatings in 2020

Acrylic or latex sealers are like floor paint. They are vulnerable to chemicals and not as tough as epoxy. You can maintain it by regular waxing or a reapplication every few years. These sealers stick better to the floor than the urethane sealer. This is the reason it is used as a primer for epoxy or oil-based floor paints.

Urethane sealers are tougher than the latex/acrylic sealers. But it does not bond well with bare concrete. It brings a clear high gloss chemical resistant finish than epoxy alone. It is also less likely to yellow in the sunlight. This is the reason it is used to seal epoxy and concrete stain. These are costlier than an acrylic sealer. The solvent-based sealers require a respirator to complete the process.

Garage floor coverings include rollout mats and interlocking tiles.

The advantage of coverings is that they are easy to set up. They fit like a jigsaw puzzle and you can complete a three-car garage in one morning while having fun! You will see all the cracks, craters, and damp concrete covered in no time. And your garage looking neat, clean, and new. The only preparation requires is proper vacuuming or sweeping.

Rigid snap-together tiles – These tiles are made of stiff plastic they can handle heavier loads such as kickstands and floor jacks. There is no expansion and contraction in extreme weather like flexible tiles. They are available in many styles and colors. You will find perforated ones that drain away snowmelt and spills too. These perforations prevent the growth of molds beneath the tiles cutting out slippery spots. They are easier to clean and chemical resistant. They do make noise when you walk on them. They are very easy to set up – simply align the male and female loops and click them together.

Roll out mats – are thick rubbery mats available in different widths, lengths, colors, and patterns. You can place Top 12 Best Garage Floor Coatings in 2020a single mat under the car or cover the entire floor space. These mats care a breeze to lay, clean, and move around.

To install – simply sweep the floor and then unroll on the floor. Butt the edges together or overlap. You can trim the mats along the walls and turns using a utility knife. The mat is durable but will stain by chemicals and hot tires. These mats are slippery when wet, in snow and sleet. They can be cut, gouged, or marked by hot shards, metal, and tires. To allow the mats to adjust by themselves do not tape them to the edges and floors. They expand up to 2% in hot weather.

Interlocking flexible tiles – There are slip-resistant and soft underfoot. They are usually 12 inches by 12 inches or 18 inches by 18 inches. These plastic tiles are available in many patterns and colors. They can be mixed and matched to create patterns. To install them cut them with a utility knife. They are pressed using a rubber roller or tapped using a mallet to interlock their edges.

They snap together to prevent seepage through their seams. They are not slippery and feel comfortable underfoot. They are subject to staining but the damaged tiles can be replaced. These tiles contract due to extreme temperature or exposure to direct sunlight. Thus, leave some room for expansion near the walls.

Benefits of A Garage Floor Coating

The concrete floor of your garage takes a lot of abuse from oil drips, moisture, road salt, chemical drips, and aging. Applying a garage floor coating not only improves its looks but also protects it from deterioration, stains, Top 12 Best Garage Floor Coatings in 2020and aging. The cracks and stains are hidden. Besides the floor is easier to clean and looks good. They liven up the area and improve the face value and market value of your home. You can also replace and renew the entire look every few years.

The paints are easy to apply to maintain and renew. The coverings such as the roll-out mats are easy to install. You can cut it according to the dimensions of the garage and its nooks and crannies. The tiles too can be cut and modified accordingly. They are waterproof and easy to clean up. If you have stains and spills, they can be washed away. You can also use a squeegee on them.

Features to Look for On Garage Floor Coating

We have discussed the individual features and benefits of the garage floor coatings. They all have their pros and cons but these are the common points to consider before you buy your floor.

Looks – The floor should lend a clean and sleek look to your garage. You should be able to use it as a multipurpose space as a party room, a man cave, a workshop, etc.

Materials – The coverings and coatings should be made of tough materials that would withstand the weather. They are made of high-performance polymers that are ideal for residential and industrial applications.

Durability – The coverings and coatings should not fade, blister, crack, yellow, or peel over time. They are highly resistant to a broad range of conditions and chemicals.

Maintenance – If you opt for smooth finishes, they are easy to clean and maintain. If they are textured, they make the dirt and dust less visible. You should be able to maintain them using the usual household tools such as a Top 12 Best Garage Floor Coatings in 2020broom, mop, vacuum, squeegee, etc.

Application process – the coatings and coverings should be easy and quick to apply. Usually, the application takes a day but epoxy is best allowed to cure for a week to prevent any marks. The tiles and mats can be used as soon as they are laid. The paints take a while to dry.

Decor – These coverings and coatings are available in many colors, textures, and finishes. Your garage will come alive with color and texture when these coatings are matched or contrasted with the cabinets, walls, etc.

Eco-friendly – They should not emit the smell of plastic, foam, and volatile organic compounds (VOCs).

FAQs

How long does it take to do a two-garage floor?

If one person is painting it – it should take a day. If you are laying tiles – a single person should be done in 24 – 48 hours. If you are using epoxy – the pouring should take one afternoon. But you can use it only after a week of curing.

Can I cover marred, flawed, or damaged concrete?

Yes, you can pour the epoxy into these flaws but as it is costly. It is recommended that you fill and smoothen out the flaws before you pour the epoxy. If you follow the same practice for other methods you will gain a flawless finish.Top 12 Best Garage Floor Coatings in 2020

How long will the Garage Floor Coating last?

If you have used epoxy the flooring should last up to 30 years. Though the lifespan for a heavily used place should be 3 – 5 years. The paints should last 1 – 4 years depending upon the traffic. The tiles should last decades unless they are outside and weathered by the elements.

How motor oil and road salt affect the Garage Floor Coating?

These substances can affect the paint and erode them quickly. Tougher the paint the longer it will resist but they too start flaking and cracking due to prolonged exposure. Sweeping and mopping should remove the chemicals and prolong the coating’s life.

Top 12 Best Garage Floor Coatings in 2020

ImageProduct NameKey FeaturesRating
1. Rust-Oleum 261845Low VOC odor4.7

2. Diamond Brite Paint 31150

Mildew & abrasion resistant4.6
3. Coloredepoxies 10002 Epoxy resin4.6
4. Rust-Oleum 318697 20 times stronger than epoxy4.5
5. Armor All AAGFMC17 Easy to maintain4.5
6. Speedway Garage Tile 789453P-50 Cleans up quickly and easily 4.4
7. Rust-Oleum 293513 Kit covers up to 500 sq. Ft4.4
8. Seal Krete Floor -Tex 40 Hides Imperfections, Stains & Discolorations4.4
9. Rust-Oleum 60003 Chemical resistant4.3
10. Rust-Oleum 203008 Attractive satin finish4.3
11. KILZ L377711 Ideal for high traffic areas4.2
12. Rain Guard Water Sealers SP-1500 Single-part urethane4.1

1. Rust-Oleum 261845

This brand was established in 1921 by Robert Fergusson. He was a sea captain who noticed that when fish oil Rust-Oleum 261845spilled on rusty metal it stopped corrosion. Since then the product has come a long way and is owned by RPM International Inc.

Features

Rust-Oleum 261845 is a 2-part water-based epoxy formula It is suitable for concrete surfaces anywhere. It is easy to use and apply to produce long-lasting results. You will gain a professional look and finish. You will be able to walk on it in 24 hours and drive on it in 72 hours. It is five times stronger than the 1-part floor paint. The kit is sufficient for 500 square feet of space. It brings you a semi-glossy finish with a subtle shine. There is no odor of chemicals or Volatile Organic Compounds (VOCs).

Materials, Finish & Durability

Rust-Oleum 261845 was introduced in the market in 2012 and since then it has been the most durable epoxy solution kit in the market. It is an excellent option for garages, workshops, and storage units. The kit includes 2 – part epoxy floor system, concrete etch, decorative chips, stir stick, instruction sheet and a DVD in English and Spanish. You will enjoy a showroom quality finish using this kit. It applies in one coat and lasts for many years. It protects against gasoline, salt, antifreeze, motor oil, hot tire pick-up, peeling, and cracking.

Application & Maintenance

Rust-Oleum 261845 kit has parts A and B. Mix them for three minutes and then apply them within 1 – 2 hours of mixing. Allow the new concrete to cure for 28 days. Apply the coating when the temperature is between 60 to 85F. Wait for 24 hours for the epoxy to set. The layer can tolerate light foot traffic. It should be able to tolerate vehicular traffic in three days. But before that conduct a moisture test. Apply a 2 by 2 sheet of plastic to the concrete. Tap the edge down. Wait to 72 hours, if there is moisture then wait for another 72 hours. You can use the RockSolid moisture stop on the floor before the application.

Additional Features

Rust-Oleum 261845 kit will yield a grey glossy floor with chips. The color should last 2 – 3 years.

Highlights

  • Industrial-grade polycuramine
  • Low VOC odor
  • No hot tire pick-up
  • Burst pouch technology

2. Diamond Brite Paint 31150

This paint comes from Jewelultra Ltd that manufactures and distributes a wide range of chemicals for industrial, Diamond Brite Paint 31150janitorial, and motor industries. Their core product is the Diamond Brite paint sealant.

Features

Diamond Brite Paint 31150 is a professional-grade paint with a mildew resistant, high hide, alkyd finish. The high gloss enamel has excellent stain removal properties. It also helps protect the exterior and interior surfaces from rust, abrasions, household chemicals. The paint is meant for industrial applications, commercial use, and machinery. When it dries it forms an extremely hardcover on the surface. This is an oil-based paint that will last a long time on surfaces with high traffic. The paint can be used on well-bonded wallpaper, brick, masonry, plaster, drywall, wood, stucco, cinder block, and aluminum.

Materials, Finish & Durability

Diamond Brite Paint 31150 is a general-purpose oil-based glossy enamel paint. After the paint has dried it brings a beautiful glossy finish to the surface. It is tough and durable. The surface becomes resistant to cracks, scuffs, peeling, fading, etc. This is a VOC complaint enamel that prohibits rusting. The product can be applied to machinery and has a durable enamel finish. It protects the interior and exterior making it abrasion-resistant. It does not fade, peel, rust, crack, and can withstand household chemicals. It is used to paint railings making them mildew resistant complete with alkyd finish.

Application & Maintenance

Diamond Brite Paint 31150 brings you an alkyd finish the first coating of the paint dries up in 6 to 8 hours. The next coat can be applied in 24 hours. This is a 5-gallon canister. You can cover an area of 300 square feet per gallon. You require mineral spirits for a clean-up and protect it from freezing. The paint can be rolled, sprayed, and brushed on.

Additional Features

Diamond Brite Paint 31150 is a 5-gallon canister that weighs 56 pounds. The product is supported by a 2-year warranty.

Highlights

  • Alkyd finish
  • 300 square feet coverage
  • Versatile
  • Mildew & abrasion resistant

3. Coloredepoxies 10002

This is a clear epoxy resin coating with 100% solids. They bring you high gloss for all types of floors that see high Coloredepoxies 10002traffic. It can be applied to plywood and concrete.

Features

Coloredepoxies 10002 brings you a clear maintenance-free finish with epoxy resin coat. It gives a beautiful metallic finish in three steps. The epoxy is interspersed with a pearlescent pigment that creates an eye-catching dramatic finish. This range offers 45 colors and they come with application accessories and instructions. You can be the artist you always wanted to be and decorate your home the way you like. The product is UV resistant waterproof abrasion-resistant and brings you a durable finish.

Materials, Finish & Durability

Coloredepoxies 10002 is tough and durable like the industrial-grade epoxies. They can withstand peeling, cracking, indenting, hot tires, etc. The look of the epoxy coatings can be enhanced by adding multicolored flakes, stone flakes, shining crystals, mica, etc. They are available in 1/6, 1/8- and 1/4-inch sizes and sold by the pound. You can get as innovative as you like. Your elegant and beautiful surface will enliven your home with 3D art. It will be UV resistant scratch resistant and heat resistant up to 500F or 200C.

Application & Maintenance

Coloredepoxies 10002 is easy to apply. First, prepare the surface. It can be plywood or concrete. The colored epoxies cone in the two-component system in the ratio of 2:1. Each kit has 3 cans – Part 1 – 2 parts resin and Part 2 is 1-part hardener. Colored epoxy has a 40-minute pot life. Then apply a clear or solid color epoxy, Follow the mixing instructions and inlaid with the flakes evenly. You can use this product on the floor and countertops. The application is very flexible and a gallon can cover 125 – 170 square feet in 3 gallons. As this is not water-based it is waterproof. They are UV resistant and VOC and VOHAP free.

Additional Features

Coloredepoxies 10002 is a 31-pound can. This product is supported by a 3-year warranty.

Highlights

  • Epoxy resin
  • Versatile
  • High gloss
  • Mildew resistant

4. Rust-Oleum 318697

This product will bring you rock-solid garage flooring made from industrial grade polycuramine.Rust-Oleum 318697

Features

Rust-Oleum 318697 brings you a durable coating for concrete using polycuramine. It is meant for garage floors, basements workshops, family rooms, etc. This is a self-leveling formula that is 20 times stronger than epoxy. The kit comes with a burst pouch that is free of VOC and odor. You can complete the project in 8 -1 0 hours and your floor will be vehicle ready in 24 hours. The kit is sufficient for 500 square feet but it depends upon the porosity of the surface. There will not be any marks, cracks, or peels. It can even tolerate chemical spills and household chemicals. In one coating you will have a showroom quality floor.

Materials, Finish & Durability

Rust-Oleum 318697 is a polycuramine coating for the floors. The mix penetrates and attaches to concrete at a molecular level. Due to this property, it forms bonds at multiple levels. The formula is self-leveling and it flexes and moves with the concrete. This prevents peeling and cracking. This high gloss floor comes from the revolutionary polycuramine which combines key attributes from many multiple chemistries into one. Due to this, you get a self-leveling, indestructible, fast curing floor. This durable floor is 20 times stronger than epoxy. It will last you for years in case of light traffic as seen in a home garage.

Application & Maintenance

Rust-Oleum 318697 comes in an easy mix burst pouch. Burst the pouch by tightly rolling it. This bursting will allow the contents of the pouch to mix. Then shake the pouch to mix the contents. Move it back and forth while squeezing the edges and corners. Continue doing this for 2 – 3 minutes. Then pour by cutting the corners. Then follow the application instructions in the kit. The kit will cover a 2.5 car garage and is resistant to hot tire pickups, chemicals and dirt.

Additional Features

Rust-Oleum 318697 kit includes a concrete etch, foam roller, denim decorative chips, two polycuramine pouches, and instructions. The coating should last 2 – 3 years.

Highlights

  • polycuramine
  • 20 times stronger than epoxy
  • No VOC odor
  • Provides high gloss terrazzo flooring

5. Armor All AAGFMC17

This is a charcoal color floor mat for the garage floors. Garages are the most dangerous floors due to the oils, Armor All AAGFMC17stains, water, etc. that may be spilled there.

Features

Armor All AAGFMC17 are floor mats in various sizes. They come in 5 sizes – 8’4″ by 7’4″, 17′ by 7’4″, 20′ by 7’4″, 22′ by 8’10” and 30″ by 60″. This one is 17 feet long and 7 feet 4 inches wide. This is an absorbent fabric with a slip-resistant, waterproof back. The mat is made of Drymate material that absorbs and holds liquids. It also wicks moisture. The waterproof back prevents the moisture and liquid from soaking through. This prevents damage or staining of the floor.

Materials, Finish & Durability

Armor All AAGFMC17 is light and durable with an absorbent top layer constructed of non-woven polyester of which 80% is recycled fiber. The waterproof bottom is polyolefin. The mat is BPA and phthalate-free. You get a smooth and even feel by laying a single sheet under the car. Or you could do wall to wall carpeting too. Simply lay one sheet next to the other. This polyester and polyolefin mat is durable and will last for a decade if you receive moderate traffic as in a regular home.

Application & Maintenance

Armor All AAGFMC17 is easy to install using double-sided tape. Just clean the floor and roll out the mat. Pull the corners tight and fix the mat using the double-sided tape. Ensure it sticks to the mat and the floor. The material is easy to cut and adjust around the corners and bends. Simply use the scissors to cut the mat to fit or cut away the frayed edges or splits. You can vacuum, power wash, and hose off the mat. Use a mild detergent and use a squeegee. The mat can even be spot cleaned but do not bleach the mat.

Additional Features

Armor All AAGFMC17 pack is 204 inches by 0.13 inches by 88 inches in dimensions and weighs 12.9 pounds. The product is supported by a 60-day limited warranty.

Highlights

  • Easy to lay
  • Easy to maintain
  • Polyester & polyolefin mat
  • Single sheet

6. Speedway Garage Tile 789453P-50

These are diamond garage tiles by Speedway Garage Tile Mfg. These are garage floor tiles with 6 loop & locks. Speedway Garage Tile 789453P-50This pack of 50 tiles contains purple tiles. The manufacturer makes tiles in different colors. You can mix and match from 11 colors and textures.

Features

Speedway Garage Tile 789453P-50 has 24 connection points – which are 6 loops on each side. These points ensure an even flat and consistent layout throughout. These are snap-together tiles that need to be pressed together. These tiles have an attractive texture with miniature diamonds embossing. This makes the tiles slip-resistant and scuff-free. You can mix and match them to improve the face value of your garage.

Materials, Finish & Durability

Speedway Garage Tile 789453P-50 is made of high impact copolymer plastic. It withstands gas, oil, automobile, and household fluids, etc. The tiles have an attractive diamond-shaped pattern. There are 6 loops on all sides that simply snap together and improve the aesthetic value of your home. It takes around 4 hours to lay tiles in a one-car garage. It is ready for use immediately. It is also easy to clean. These tiles can withstand the weight of large and small automobiles. They are perfect for hangars, garages, basements, gyms, etc.

Application & Maintenance

Speedway Garage Tile 789453P-50 are copolymer tiles available in 11 colors to mix and match. They are available in blue, black, orange, beige, purple, white, yellow, green, and terra cotta. No adhesive is required to install them. They can be washed, mopped, and also withstand household and auto chemicals. You can use a broom, squeegee, water hose or pressure washer to clean them. The tiles are designed to allow air and water circulation under them. This prevents the growth of mold and mildew under the tiles.

Additional Features

Speedway Garage Tile 789453P-50 package weighs 34 pounds and is 12 inches by 12 inches by 0.5 inches in dimensions. The tiles are supported by a 10-year warranty.

Highlights

  • Lock & loop tiles
  • Interlocking design
  • Polymer plastic
  • Heavy-duty tiles

7. Rust-Oleum 293513

This is an industrial grade polycuramine 2.5 garage kit by Rust Oleum. This is a durable covering for the concrete Rust-Oleum 293513floor. It is ideal for family rooms, gyms, garages, basements, workshops, etc.

Features

Rust-Oleum 293513 is a self-leveling formula that is 20 times stronger than epoxy. There is an eco-friendly burst pouch included for easy pouring. You can complete this project in 8 to 10 hours and the floor will be ready to drive on in 24 hours. This kit can cover 500 square feet of area. But this depends upon the porosity of the surface. You can get a high gloss terrazzo look with a high gloss finish. The floor is peeling, cracking, and fade resistant. It is resistant to hot tires, chemical spills, etc. In one coat you will have showroom quality finish.

Materials, Finish & Durability

Rust-Oleum 293513 kit has the revolutionary industrial-grade polycuramine. It has a low VOC and odor-free formula. It is available in 6 types, garage, metallic, pearlescent, clear top, marble and textured clear top.

Application & Maintenance

Rust-Oleum 293513 is very easy to apply – prepare the surface. Scrub and etch the soiled areas. Rinse and dry then apply the mix. Burst, shake, and pour – combine the mix then burst the pouch. Shake for the ingredients to mix and then pout. The mix will level itself out. The in sections of 4 by 4 inches apply the chips and wet coats. The surface will be very hard and resistant to gas, oil, salt, and other harsh chemicals.

Additional Features

Rust-Oleum 293513 kit contains the chips, chemicals, etc. The cover is supported by a limited lifetime warranty.

Highlights

  • Penetrates the concrete
  • Makes molecular bonds
  • Self-leveling
  • Flexes & moves with the concrete

8. Seal Krete Floor -Tex 40

The company makes high-performance coatings that have been formulated for exceptional durability. They can Seal Krete Floor -Tex 40withstand harsh conditions and resist chemicals. They offer solutions for many applications on the floor, walls, countertops, etc.

Features

Seal Krete Floor -Tex 40 is a premium formula that is resistant to moisture, oil, salt, chlorine, gas, etc. It is meant for masonry surfaces and concrete. These coatings are durable and create a non-slip grip on the surface. They also hide imperfections. These areas are tough enough to handle high traffic.

Materials, Finish & Durability

Seal Krete Floor -Tex 40 is a textured concrete coating that is non-slip and durable. They offer a decorative finish and resists damage from oil salt and other reagents. The coating outwears conventional paints and coats and can be put on wooden stairs too.

Application & Maintenance

Seal Krete Floor -Tex 40 can be used on masonry, woodwork, and concrete. It can be put on patios, pools, decks, ramps, walkways, etc. This acrylic paint coating is tintable and paintable. It can hide imperfections giving a tough finish to resist salt, gas, oil, and chlorine. Just choose the color and add one gallon of the seal or floor paint. You will enjoy a non-slip decorative surface in no time. It meets all ADA requirements and can be applied by spray, roll, or brush.

Additional Features

Seal Krete Floor -Tex 40 is a 5 gallon can. The unit is supported by a limited lifetime warranty.

Highlights

  • Non-slip
  • Textured coating
  • Concrete, masonry & wood
  • Resistant to salt, auto & household chemicals

9. Rust-Oleum 60003

This is an industrial grade polycuramine 1 car garage kit by Rust Oleum. This is a durable covering for the Rust-Oleum 60003concrete floor. It is ideal for family rooms, gyms, garages, basements, workshops, etc.

Features

Rust-Oleum 60003 is a self-leveling formula that is 20 times stronger than epoxy. There is an eco-friendly burst pouch included for easy pouring. You can complete this project in 8 to 10 hours and the floor will be ready to drive on in 24 hours. This kit can cover 250 square feet of area. But this depends upon the porosity of the surface. You can get a high gloss terrazzo look with a high gloss finish. The floor is peeling, cracking, and fade resistant. It is resistant to hot tires, chemical spills, etc. In one coat you will have showroom quality finish.

Materials, Finish & Durability

Rust-Oleum 60003 kit has the revolutionary industrial-grade polycuramine. It has a low VOC and odor-free formula. It is available in 6 types, garage, metallic, pearlescent, clear top, marble and textured clear top.

Application & Maintenance

Rust-Oleum 60003 kit yields a gray floor with white black and blue chips. The coating is very easy to apply – prepare the surface. Scrub and etch the soiled areas. Rinse and dry then apply the mix. Burst, shake, and pour – combine the mix then burst the pouch. Shake for the ingredients to mix and then pour. The mix will level itself out. Then in sections of 4 by 4 inches apply the chips and wet coats. The surface will be very hard and resistant to gas, oil, salt, and other harsh chemicals.

Additional Features

Rust-Oleum 60003 kit has 1 polycuramine pouch, a 0.5-pound pouch of decorative chips, 1-pound concrete etching, and a roller. The unit is supported by a limited lifetime warranty.

Highlights

  • No hot tire marks
  • Low VOC
  • Chemical resistant
  • Easy & quick pouring & setting

10. Rust-Oleum 203008

This is a basement floor kit in tan color. the unit transforms the basement into a working, living, or playing space. Rust-Oleum 203008This is an epoxy shield to protect and beautify your floor.

Features

Rust-Oleum 203008 is an epoxy shield with a tan stain. It transforms your basement into a living space. You apply it to the floor and walls to resist wear and staining. The kit includes water-based epoxy coating, decorative colored chips, a stirring stick, and instructions. The application seals the floor hardening it and making it easy to clean. This easy to roll formula brings you a satin finish that covers 250 square feet area. You can clean it using household cleaners, soap, and water.

Materials, Finish & Durability

Rust-Oleum 203008 kit has two cans – 1 quart of activator and 1 gallon of base. There are the chips, the stick to stir the mix and instructions. Apply using the epoxy roller then apply the chips then cover with the sealant. The kit should cover 250 square feet. If the surface is porous you may require more. The kit is available in two colors – tan and grey.

Application & Maintenance

Rust-Oleum 203008 is easy to apply. Prepare the surface. Scrub and etch the soiled areas. Rinse and dry then apply the mix. Seal the edges of the area to prevent moisture from work its way under the layer. Combine the mix and apply using the roller. Then apply the chips and wet coats. The surface will be very hard and resistant to gas, oil, salt, and other harsh chemicals within 24 hours. But to be sure it has hardened – wait for 4 days.

Additional Features

Rust-Oleum 203008 kit has 1 polycuramine pouch, a 0.5-pound pouch of decorative chips, 1-pound concrete etching, and a roller. The unit is supported by a limited lifetime warranty.

Highlights

  • Transforms basements
  • Seals floors
  • Easy cleanups
  • Easy to pour & set

11. KILZ L377711

This is an epoxy acrylic paint that can be used inside and outside the building and on the garage floor. This slate KILZ L377711grey paint has a satin finish.

Features

KILZ L377711 is a single component of water-based paint that is resistant to oil, gasoline, and chemicals. It is meant for bricks, masonry, garage, and concrete. These coatings are durable and create a non-slip grip on the surface. They also hide imperfections. These areas are tough enough to handle high traffic.

Materials, Finish & Durability

KILZ L377711 brings you a satiny smooth coating that is non-slip and durable. The decorative finish resists damage from oil salt and other reagents. You can apply it in all high traffic areas such as patios, porches, garages, basements, etc. The viscosity is 90 – 100 KU the volume of solids is 31% and the weight of solids is 41%. A gallon of this paint covers 500 square feet on smooth surfaces and 400 square feet on rough surfaces.

Application & Maintenance

KILZ L377711 can be used on masonry and concrete. It can be put on patios, pools, decks, ramps, walkways, etc. This acrylic paint coating dries to a satiny finish. It hides imperfections and is tough enough to resist salt, gas, oil, and chlorine. It can be sprayed, rolled, or brushed on to a surface.

Additional Features

KILZ L377711 is a 1 gallon can. The unit is supported by a limited lifetime warranty.

Highlights

  • Brush, roll or spray
  • Ideal for high traffic areas
  • Requires two thin coats
  • Applicable on horizontal and vertical surfaces

12. Rain Guard Water Sealers SP-1500

This is a garage floor urethane coating. It is water-based, eco-friendly, and emits a low odor. It is premixed with Rain Guard Water Sealers SP-1500Slip Resist grit additive. The coating is resistant to hot tire pickup and chemical spills. There is a single part urethane where no mixing is required.

Features

Rain Guard Water Sealers SP-1500 is meant for laundry rooms, garage floors, workshops, etc. It is impact, wear, and stain-resistant. There is no yellowing, peeling, or cracking of the paint. After you have applied the paint or while working with it there is low VOC and no odor. The 1-gallon can will cover 400 square feet of the non-porous surface. You get two coats for a 1 car garage.

Materials, Finish & Durability

Rain Guard Water Sealers SP-1500 is a urethane coating gives a high gloss finish to the floor. It is resistant to chemical spills, gasoline, peeling, hot tire pickup, etc. The surface should last you 2 – 5 years depending upon the traffic.

Application & Maintenance

Rain Guard Water Sealers SP-1500 should be applied between 50 – 90°F. The paint is meant for concrete garages, laundry rooms, walkways, workshops, and driveways. It needs 2 coats for a 1 car garage this should be approximately 400 sq. ft. Allow at least 24 hours after application to dry completely. It is easy to maintain using a mild soapy solution to clean it.

Additional Features

Rain Guard Water Sealers SP-1500 is a 1-gallon pail. The product is supported by a 10-year warranty.

Highlights

  • No yellowing or peeling
  • No VOC
  • Slip resist grit
  • Single-part urethane

Leave a Comment

Your email address will not be published. Required fields are marked *