Cars are now an essential part of our being. It is not just about getting from one place to another but also a lot about your liking, your passion, and utility that reflects from your car. Having said that a car is exposed to a lot of harsh environments – the dirt, the intense pollution, the heat, cold, and the rain. Every element leaves some kind of effect on your car’s visual appearance and you would like to have regular maintenance cleaning to keep your car new and shining. However, doing it manually is a very labor-intensive task, and getting it done by a car shop is expensive. but there is an alternative, the Foam Cannons pose a viable solution to all your car cleaning needs.
Read our latest guide about the best car wash soaps.
Cleaning your car using a soap, bucket, and towel takes time and effort and doesn’t also provide the kind of finish you expect to get from a car wash. Also, the professional car was is an option but that requires carrying your car to the shop and getting it done at a cost that you may want to expense every time you want a car wash as this additional cost overtime that could be pretty expensive. Foam Cannons can perform a professional level car wash in the comfort of your place with slogging much and without spending much.
A high-quality foam cannon for cars brings shine, a luster that you expect to like that of a new car, and also does it at a rapid pace. The process is not difficult, no expertise is required and best of all it is affordable. You need not have any specific set up to get your foam cannon in action. It is simple to prepare, refill, and get into action. Also, these devices are not expensive and can get a high-quality one without spending too much.
Read our complete guide about the best car wax.
Advantages of a top-notch foam cannon for Cars
Below are the advantages of a top-notch foam cannon
- Easy to Clean: The steps involved in the use and application of a quality foam cannon are simple and just by following the said steps anyone now can wash. Just be aware of pre-washing once before application to get away with unnecessary dust and debris and rinse carefully after the application. Also drying and sunlight are other important aspects. Though don’t take in too bright a sunlight, recommend is to have when the sun is gentle but no signs of rain.
- Easy Control: The foam cannon is easy to prepare and use. It is used to spray foam, wide and thick depending on how you like to spray it. The Nozzle control is easy to adjust and one can choose how to dispense and shoot the layer of foam. It is recommended to leave the foam for 5 to 10 min before rinsing it off and let it dry for a shining and brighter touch.
- Multiple Usage: The foam cannon is primarily for your cars to have a professional wash. However, it can have a variety of use also to clean your driveway, parking space, etc. Also, there is no limitation on what kind of vehicle it can clean – be it a 2 wheeler, 4 wheeler or an extreme 18 wheeler truck.
- Durability: The foam cannon is made with durable material. Since it is subjected to water and soapy solutions, a high-quality one would behave resistance to these elements and keeps well over a longer period without any performance issue
- Time & Cost saver: The foam cannon is an extreme time and cost saver. It saves your effort than the bucket and towel cleaning and does it very neatly and at just the push of a trigger. Also, these devices are comparatively inexpensive compared to the cost it saves you long-term on the cost you would have paid at the shop.
Types of Foam Cannon
Below are the different types of foam cannon one should look into
- Based on cleaning: Foam cannon vs Foam Gun
A foam gun generates power and pressure using a garden hose, however, the outlet only gives thin suds and lacks the features of using soap to have that thick layering. On the other hand, Foam Cannon is great car washing equipment to have a thick layering of foam for efficient cleaning.
- Based on bottle shape: Wide base vs narrow base
Most of the containers available are of varied shapes and sizes even they may have the same capacity. Some have a narrow bottom, some are cylindrical and some have a wide base. The wide base had better stability and can be put on any surface without worry of it falling. Look out for an ergonomically shaped one to give you this flexibility.
Features of high-quality Foam Cannon:
Below are the features that users should look into, to make an informed choice ideal for their need for a high-quality foam cannon.
- Connectors: Look for a quality connector as these connectors play a pivotal role in the performance of the overall foam cannon. With a high-quality foam cannon, you would get a highly corrosion resistant made connectors, of brass or stainless steel.
- Capacity: Capacity will decide how much the container can hold the liquid and it can go for how many washes. If you are keen on cleaning your cars multiple times a week or have more cars to wash in one go, it is recommended to have a foam cannon with a large ounces’ capacity.
- Container Build: The built of the container is crucial to know as this one holds the entire solution. Check for a sturdy built one which does not break under pressure and can withstand falls. Also, added benefits like a transparent holder help to keep a tab on your refilling need.
- Spray Gun: The spray gun is the trigger that helps you do the action. Many of the makers will have the gun with the package and with many you need to get it separately. However, if you already have one, do check for the compatibility with the inlets of your foam cannon.
- Nozzle angle: The quality foam cannon makers understand the nitty-gritty of car washing and provide advanced nozzles and features to have a better washing experience. Check for the ones with varying nozzle width and angle to control the spread and also angle. This will help clean efficiently even the toughest spots.
- Inlet connection & Pressure: The inlet connectors decide to what all guns of inlets you can connect. Also, the quality ones will not let escape any water from the connection and keep the pressure steady. Speaking of pressure, a quality foam cannon will have a good pressure outlet which will help spray the foam layer faster and clean efficiently. Most foam guns handle pressure in the range of 1000 to 45000 psi.
- Are the foam cannon and the gun compatible with a regular garden hose?
Most of the foam cannon has standard inlets. However, do check the manufacturers’ specification before getting one to ensure compatibility
- Do these foam cannon works with a pressure of 2000 psi.?
A quality foam cannon can work with pressure from 1000 to high 4000-45000 psi. Still, as a precautionary measure, it will not hurt to check the pressure specifications on the package as well.
- What is the recommended angle for Nozzle?
Though any angle which you can work with is any, however, many suggest 40 degrees.
Top 15 Best Foam Cannons in 2020
|Image||Product Name||Key Features||Rating|
|1. MTM Hydro 28 Foam Cannon||Adjustable fan blade||4.7|
|Robust dial volume controller||4.6|
|3. Karcher 26431470 FJ6 Foamer Foam||Cylindrical, transparent and drop resistant container||4.6|
|4. Tool Daily Foam Cannon for Car Wash,||EASY to install||4.5|
|5. Sooprinse Foam Cannon||Great visual appearance||4.5|
|6. Atmozon Foam Cannon Spray Gun||3 different inlet adapters||4.4|
|7. MATCC Car Foam Gun||Leak-Free||4.4|
|8. Tool Daily Foam Cannon||5 Nozzle Tips||4.4|
|9. DUSICHIN SFL-001 Foam Cannon||Heavy Duty Design||4.3|
|10. Twinkle Star Snow Foam Cannon||Hand grip with quick connector||4.3|
|11. DUSICHIN DUS-114 Foam Cannon||3000 PSI high pressure water gun||4.2|
|12. Torq R1 Snow Blaster Gun||In-Line filter mesh screen||4.1|
|13. HassPro Foam Cannon Pressure Gun||2 years money back Warranty||4.1|
|14. Foseal Snow Foam Cannon||Handles 2gpm and 1,000 PSI pressure||4.0|
|15. JWGJW 198 Foam Cannon||Variable spray nozzle||3.9|
MTM Hydro 28 is one of the premier car washing gear which helps you get a
premium professional touch to your car washing. Car washing is a challenge to many, with lack of time, lack of proper gear, and the expensive car shop wash. MTM Hydro 28 foam cannon has brought an easy to use solution to end all your struggle. It is just standing and deliver to get the job done.
The design of the foam cannon is smart and user friendly. The bottle container has an easy grip and ergonomic in design. It has an M22 14 mm & 15 mm connector which are designed corrosion resistance and leak-proof with brass and stainless steel. The connector doesn’t spare any water to leak keeping the pressure intact. The two different connectors also give you the option of the varied fitting.
The performance of this great kit is that of a high-end job shop. It comes with several adjustable features. It has a clickable adjustment knob which lets you decide how much water pressure should flow. It has an adjustable fan blade which gives you the spray width and thickness adjustment. The spray pattern is horizontal-vertical which provides a complete end to end and complete washing. The gun houses the garden hose fitting and overall combined with this foam gun, the washing is deep and intense. It also has Teflon tape and filter in the package. Be cognizant of using recommended soap only and once done do clean the bottle too as not to clog the filters for long durable use.
The MTM Hydro 28 is a complete package. It has high-end Italian made PF22.2 foam container along with SG28 easy to hold spray gun. The gun has reinforced ribbed housing which gives you a safe and tight grip. It also has a 3/8 inlet fitting which is secured with twist and seal protection for not letting garden hose leak. The container is sturdy and can sustain drops and water pressure use after use without breaking.
- The kit has high-end Italian made PF22.2 foam container along with SG28 easy to hold the spray gun
- The bottle container has an easy grip and ergonomic in design with durability against drops and high pressure.
- Easy to hold spray gun with reinforced ribbed housing which gives you a safe and tight grip.
- Adjustable fan blade with spray width and thickness adjustment and spray pattern of horizontal vertical spray.
Chemical Guy’s ACC_326 foam cannon is a time saver and cost saver car washing gear to give you professional-grade washing without the need of sweating over it.
Torq foam blaster by Chemical Guys has a very user-friendly design. It comes in a complete two-piece system with the container, nozzle, and foam wash gun. The nozzle is made of quality material that has a compatible design that can fit with any garden hose. It does its job neatly with easily rinsing dirt and debris and giving your car a shine you would applaud. It has a water saver design. The nozzle is designed to not let flow water when not in use, saving a lot of water over the car wash. The foam gun can easily be detached using a quick release ring.
Chemical Guy foam cannon provide scratch less wash experience. This Torq foam blaster produces thick stub and a complete shop like bubbly wash experience. It doesn’t require grinding and doesn’t require any manual scrubbing giving you a complete wash. It doesn’t require any pressure washer to operate
It has adjustable foam concentration. The robust dial volume controller help adjust the water and soap mix and gives the control in your hand to how soapy you need foam solution to be. The connector is made of aluminum and brass. It provides a further sturdy container that has a wide base and mouth. It is easy to fix the solution in it, easy to keep it over any flat surface, and easy to clean. With over corrosion-resistant construction this is one of the durable car washing gear you can count upon.
- It comes in a complete two-piece system with the container, nozzle, and foam wash gun.
- It has a water saver design; the nozzle does not let water flow when not in use.
- The connector is made of aluminum and brass for corrosion-resistant construction
- It has adjustable foam concentration with robust dial volume controller to help adjust the water and soap
- Chemical Guy foam cannon provide scratch less wash experience
Cars are now almost an essential part of being. Along with home, cars are deeply valued both as an asset and of financial value. Hence taking good care of the car becomes that much importance. Also, you would not want your precious valued possession to stand and collect dust. Karcher 26431470 FJ6 model for foam cannon is a one-stop solution to give your car the care it needs.
A simple approach to design with a wide base container, easy to refill and clean, it has an extremely robust connector a rugged nozzle. The design is efficient to create thick foam and within minutes it can generate and dispense heavy thick foam to cover your car or any surface you like to clean. It needs and pressure washer and can be attached to any regular pressure washer to become a car washing gear. For best results, it connects with directly to the pressure washers trigger gun of Karcher K2-K5 electric model
It has a multi-use. Specially designed for your car wash but can be used to clean furniture, windows, floor, etc. any surface that can be cleaned by soap and water. The container is cylindrical and transparent. It shows you the level of soap and also easy to keep when not in use.
The construction is of durable plastic. It has all the adjustable controls for both detergent flow and spraying. It has a volume control knob. The connector connecting the inlet and the nozzle. The suction tube connecting the drop-proof container and the nozzle which can adjust the spray angle and width of the foam. The Nozzle is again adjustable to control the spray.
- Design is efficient to create thick foam and within minutes it can generate and dispense heavy thick foam
- Specially designed for your car wash but can be used to clean furniture, windows, floor, etc.
- Construction is of durable plastic with adjustable controls for both detergent flow and spraying
- The container is cylindrical, transparent and drop resistant
Tool Daily is committed to meet customer needs and provide the best user experience. Foam cannon by Tool Daily gives you a touchless cleaning experience and the convenience of your place. A highly recommended foam cannon for all your car washing needs.
The design is simplistic and works efficiently to produce thick foam It works best with a Pressure Washer. It has a 1/4″ quick disconnection that fits almost all kinds of a pressure washer. It also has an additional Orifice Nozzle with 1.1mm, 1/4 Inch. It is easy to replace and quick to use. The container is ergonomically designed which can be put on a flat surface without spilling.
A car wash can be a light no pain experience rather than the troublesome labor-intensive experience it is generally considered. The reason being most of the time one struggles to get those details right essential for a quality car wash. The Tool Daily foam cannon achieve this by producing thick stub. It has adjustable foam which is to mix in the wide mouth and wide base container. It has multiple uses. Apart from being a great car cleaner, it can also be used for cleaning driveways, roofs, windows, etc.
The unit has a solid construction. It is made with corrosion resistance material like brass and ABS. The container is good to resistance even hottest of weather for a max temperature of 60℃ / 140 ℉. It can work with variable water pressure. The soap holding container can sustain falls and is durable. It can hold from 1000 PSI to a high-pressure stream of 4000 PSI. The maker provides guaranteed assurance. They have customer support available to address any queries or any assistance required.
- 1/4″ quick disconnection that fits almost all kind of pressure washer and also has an additional Orifice Nozzle with 1.1mm, 1/4 Inch
- Made with corrosion-resistant material like brass and ABS and have resistance even hottest of weather
- Soap holding container can sustain falls and highly durable
- The unit can hold from 1000 PSI to a high-pressure stream of 4000 PSI
- multiple-use with from being a great car cleaner to cleaning driveways, roofs, windows, etc.
Soonprinse understands the car washing needs and how to do it with less strain on the user. Soonprinse foam cannon is a superb solution to achieve a remarkable car washing result with almost no effort on your part. All you need to do is set it right, aim, and shoot.
The design is efficient to produce a thick foam layer and also give you the adjustment control if you want to vary it. The foam volume control knob can be adjusted to control the ration of water and soap. The connector is very precisely designed to give an efficient cleaning with adjustable controls so that the user can decide the thickness, the pressure.
The Sooprinse foam cannon is an advanced car washing gear that helps you have a convenient and hassle-free experience. The nozzle is adjustable and it can be adjusted to flat pan or pencil to decide the thickness of foam it would dispense. The nozzle can work with an angle of 30 degrees to give you a perfect cleaning experience. It can reach even tough spots like under the car, roof gutter. It also has a 25-degree nozzle tip to further navigate the stream.
The connector construction is corrosion-resistant, leak-proof with brass and stainless steel construction. The connector unit has several components like a foam volume control knob, foam creator and quick disconnect fitting to spray gun. The nozzle handle is made of durable plastic. This provides easy to clean and high-pressure intensive cleaning too. The gun fits with the Metric M22-14mm inner connector and the gun is in purple. This gives the unit a supreme visual appearance. The container is durable, drop resistance, transparent to view the soap level, and easy to hold.
- Construction is corrosion-resistant, leak-proof with brass and stainless steel construction.
- The connector unit has components like a foam volume control knob, foam creator and quick disconnect fitting to spray gun
- The nozzle is adjustable to decide the thickness of foam it would dispense and can also work at 30 degrees’ angle
- The gun is in purple with great visual appearance with Metric M22-14mm inner connector compatibility
The Atmozon foam canon spray gun is a useful product for both professional and personal use. The kit offers the chance to spray water with less soap or vice versa for cleaning a vehicle. What makes it a compelling product is the features and accessories provided. They make it easy to opt for the right pressure and option, depending on the vehicle and the need.
One of the critical aspects of the product is design. The layout focuses on the ease with which a user can carry. For instance, the lightweight yet sturdy construction helps in maneuvering the product with the right balance and less fatigue on the hands. Likewise, the accessories design is such that it gives the option to choose the wide spray to focused spray. Also, there is a provision to adjust the combination of water and soap. Turning it towards the positive direction increases water content with less soap consumption, while the negative direction increases soap consumption with reduced water intake.
Keeping the user in mind, Atmozon ensured to deliver high performance to the foam spray gun. The non-slip grip protects the finger during the operation while the use of high-quality materials (brass, stainless steel, and rugged plastic) increases the lifespan. With a maximum pressure of 4,000 Psi, the high-pressure spray gun fulfills the requirement of cleaning solutions with ease.
As one would be using the Atmozon foam canon spray gun with water varying in pH levels, the company constructed using rust-proof materials. For instance, the inner ceramic valve ball ensures the proper flow of the water according to the pressure setting. Likewise, the use of brass and stainless materials always increases the lifespan of the product while ensuring the desired output pressure.
- Possible to use it as high-pressure gun and foam cannon
- Three different inlet accessories give the ease of connection
- Five nozzles with varying angles for different cleaning solutions
- Constructed out of high-quality materials – brass, stainless steel, and rugged plastic
- Improved design helps in cleaning foam creator
- Knob to control water and soap combination according to the requirement
When considering a foam gun, there are several aspects to consider. Nonetheless, the MATCC car foam gun made it to the list due to the ease of use, features, and quality of the product. Not only these characters make it an apt choice but also a good one to consider when it comes to purchasing one.
The design of the car foam gun is what makes it unique. The compact layout of the spray gun makes it simple to handle during operation. The use of rugged plastic helps in reducing the weight of the product and extend the lifespan. Due to this, it is easy to move the foam cannon during the use even when the setting is at high pressure. The balance obtained assists in handling the gun with a single hand without increasing fatigue. The gun has the provision to choose the pressure output by selecting the preferred adjustment using the ratio dial.
MATCC made sure to deliver high-pressure output for the product. Furthermore, the use of the ratio dial makes it simple for users to select the preferred pressure output based on the application. Not only is the gun helpful for cleaning a vehicle, but it also acts as a pesticide and insecticide sprayer. The dial ratio is between 2.5bar to 6 bar output, and the presence of double filters in the 0.23-gallon bottle prevents debris from spoiling the paint of the vehicle. The rubber sealing at various joints helps prevent leaking, making it entirely leak-proof even when the output setting is to the maximum.
The use of brass joints, rubber seals, adjustable ratio dial, soap water filter, and removable nozzle makes the MATCC car foam gun for different types of working conditions. As it is easy to disassemble and re-assemble the foam gun, one can quickly clean after each use to retain the original functionality.
- Brass joint connects to a garden hose with ease
- Adjustable ratio dial for varying water pressure
- Possible to use with water and soluble fertilizers for garden maintenance
- High-quality components ensure extended life
- Double filters prevent debris from the soap solution
- One-year risk-free warranty
The presence of a foam cannon at home gives anybody the freedom to wash their vehicles with ease. The Tool Daily foam cannon gives everybody a choice to own a high-quality product that functions and answers to the vehicle cleaning solution efficiently. It is the features, the quality of the materials used, and the performance that makes it a choice of consideration among the others in its class.
Tool Daily designed the foam cannon keeping in mind the end-user. The lightweight structure can hold onto one liter of soap solution with washer nozzles delivering a maximum pressure of 3,000 Psi. The compact design makes it easier to handle even when the pressure is at maximum. The ¼-inch connector at the end helps in connecting the foam cannon either to a spray gun or water hose with ease. Because of the simplistic design and connection capability, maneuvering the cannon is easy. Likewise, the water regulator knob helps in adjusting the flow of the water and soap concentration according to the requirement.
Tool Daily ensured to provide the best output for the users. It is offering five different nozzles, each with varying pressure settings. Therefore, a user can choose any one of the nozzles to match the requirement and begin using the foam cannon. The settings help users achieve pressure output between 1,000-3,000 Psi. Furthermore, each of the nozzles has a different output angle to control the spread of the output and pressure. Therefore, one can use it for either watering plants or washing a car. Apart from adjusting the foam, the spray nozzle at the front helps in controlling the sprinkle pattern.
The quick stainless-steel connector, brass joints, durable plastic knobs, and foam maker help in extending the life of the foam cannon. One can dismantle the assembly with ease, remove the foam maker, clean it, and reuse. It helps in retaining the original specifications for long-term use. The Tool Daily foam cannon is suitable for different washing needs – cars, bikes, sideways, and watering plants.
- ¼-inch connector for quick connection
- Adjustable foam controller
- Adjustable spray nozzle
- Five pressure washer nozzles
- High-pressure of 3,000 Psi
An adjustable foam cannon works like a charm – for professionals and for at home. The DUSICHIN SFL-001 foam cannon fulfills the need with ease. The exciting part of the cannon is its ability to act in two different ways – to clean a vehicle at varying pressure settings and watering plants in a garden. The quality of the product ensured an extended life span and reduced operating costs within a short time.
Keeping the uses, DUSICHIN designed the foam cannon such that it is lightweight, trendy, and handy. Likewise, the addition of a ¼-inch stainless steel connector makes it convenient for a user to attach it to a water hose pipe or a spray gun with ease. The company opted for a fixed low-pressure output, which helps in meeting several requirements, such as watering the plants, using soluble fertilizers, and cleaning vehicles without any damages. The compact product helps a user to move across a car or the garden without stress or finger fatigue. Also, the regulator adjustment helps in choosing the right combination of water and soap.
The performance of the foam cannon is outstanding. Not only it fulfills the essential task of cleaning a vehicle with varying spray control and volume, but it also meets the specification of any professional foam cannon. With 1.2gpm and 1,000 Psi, the cannon gives the freedom to clean a vehicle without causing any damage. The adjustable knob helps in altering the quantity of the water and the soap solution to receive the needed volume according to the need. Furthermore, the adjustment of the spray nozzle assists in altering the angle of spray and output.
Given the importance of the use, DUSICHIN SFL-001 foam cannon functions efficiently, for it uses high-quality materials. The use of brass connectors helps in the prevention of rust formation, while the quick disassembly of the body gives easy access to clean to foam creator.
- ¼-inch connector to connect to a water hose pipe or spray gun
- Possible to control the mixing of water and soap using the rotary switch
- Rotary nozzle to control volume output
- Brass connectors for extended lifespan
- 2gpm with 1,000 Psi output
What more would one expect than having a foam cannon at home that is affordable and compact? The Twinkle Star snow foam cannon provides a wonderful chance for both professionals and home users to pick up one and use it for either cleaning vehicles or gardening. The use of high-quality materials not only increases the product’s lifespan, but it also prevents the formation of rust.
The compact design gives freedom to use it and maneuver it with ease. Twinkle Star understands the need of the users and ensured to keep it lightweight by choosing high-quality plastic that reduces weight but also withstands the different working conditions. The ¼-inch quick disconnecting connector makes it convenient to attach the cannon to a hose pipe or a spray gun with ease. The adjustment of the spray output, along with the volume, gives the ability to make changes according to the use. Also, the provided five different nozzles offer the choice to choose either of them depending on the requirement.
The cannon comes with five different nozzle tips, which alter the pressure output. Also, the adjustment nozzle converts the angle and volume of spray. Given the product uses high-pressure, the company ensured the longevity of the product by choosing brass connectors. The high-quality and durable components increase the performance of the foam cannon without reducing the lifespan. It requires a minimum of 2.5gpm and at least 1,000 Psi pressure to function efficiently. Users can alter the output using the adjustable spray nozzle, which gives control over the angle and volume.
Given that users choose a rugged product, Twinkle Star snow foam cannon opted for high-quality components for its construction. The brass connectors, stainless steel ¼-inch connector, removable cover to clean the foam creator, and rubber seals at all junctions make the cannon an ideal choice for either low or high-pressure washing solution.
- Brass connectors and ¼-inch stainless steel connector
- Five nozzle tips with varying angles to control pressure and output
- Control switch to adjust the mixing
- Adjustable nozzle for the jet stream to the fan pattern
- 5gpm and 1,000 Psi minimum requirements
A foam cannon is useful at home and as a professional tool. Given the advantages provided by it, purchasing one would be beneficial. The DUSICHIN DUS-114 foam cannon allows owning one and making the best use of it, either for cleaning vehicles or watering a garden. The use of premium materials for the construction of the cannon increases the lifespan and makes it a viable option for use under variable situations.
A product only withstands the competition when it meets the expectations of users. The DUS-114 snow foam cannon is handy, compact, and lightweight, making it an ideal investment. It is the layout that helps one to free the hands and operate with complete freedom. DUSICHIN made sure to provide accessories that help alter the pressure output. The spray gun reduces finger fatigue while offering a perfect balance during operation. The spray pattern is adjustable – thanks to the rotary switch available at the front. The adjustable nozzle tips alter the pressure output and angle of the mixture.
The performance of the foam cannon depends on the nozzle tips. The DUS-114 comes with five different nozzle tips, each with varying angles. These tips help achieve the required pressure according to the need. The black nozzle tip is for use with soap solution, and an ideal choice for cleaning a vehicle. The rest is helpful to water a garden or use it with soluble fertilizers. The high-pressure gun achieves an output of 3,000 Psi. As the spray nozzle adjustment is possible, altering the pattern gives complete control and fulfills a task.
DUSICHIN DUS-114 foam cannon uses brass material for connectors, rubber seals at junctions to prevent leaks, and rugged plastic body to withstand high-pressure output. Likewise, the plastic shells are quickly removable, making it easy for cleaning and reusing the gun after each use. The quality of the components enhances the life of the cannon and durability.
- ¼-inch quick connector with brass connectors
- Achieves 3,000 PSI pressure output
- Five different nozzle tips with varying angles
- Rotary switch to alter spray angle and pattern
- Quick disassembly helps in cleaning the foam creator with ease
The perfect method to clean a vehicle without causing excessive damage is by using a foam gun. The Torq R1 snow blaster gun gives an excellent opportunity for enthusiasts and professionals to use it to fulfill the cleaning needs. It is the benefit that makes it an ideal investment when compared to conventional products. Furthermore, the quality of the product is such that the investment reduces the operating costs within a short time.
What makes the R1 foam gun is the design and the characters. Not only the company chose a trendy layout, but it also opted for a compact design to ensure that it gives the freedom of flexibility during usage. It meets the expectations of the users, and thus, provides a fierce competition to others. The cannon spray is comfortable, trendy, and compact. Therefore, users find it extremely quick and easy to maneuver across the vehicle. The grip and the gun handle design is such that it eliminates hand fatigue and helps achieve the right balance even when operating at maximum pressure output.
The canister can produce thick mounds of foam – thanks to the availability of three different nozzle tips. Not only the tips help in adjusting the thickness but also the pressure of water. Therefore, one has complete control over the amount of foam they like to have for a wash along with the pressure at which they wish to spray. The specialty of the foam cannon is that it does not require any pressure washer. One can connect it to any standard garden hose for instant action.
Torq R1 snow blaster gun uses rigid construction to avoid cracks when operating at high pressures. Also, the use of brass material for valve and rubber seals at couplings makes it leak-proof. It even hosts an in-line double filter that barricades particles present in water and soap solution to prevent scratches on the vehicle.
- Connection to any garden hose is easy
- Rigid construction prevents cracks and fading
- Three different nozzle tips to control foam thickness
- In-line filter to avoid the entrance of debris
- Mixes water, soap, and air equally for soapy foam
The HassPro foam cannon pressure gun acts as a complete car cleaning kit, for it comes with numerous accessories, features, and options. Not only they help achieve full control over the thickness of the foam, but they also help in regulating the water pressure. The choices it gives help in altering the direction of the flow according to the need. The quality construction further makes it a demanding product in its class.
The design of the pressure gun is simple. The company ensured to opt for a realistic approach, which makes it convenient during handling. The compact design is lightweight yet sturdy. It helps in easy maneuvering of the foam cannon without causing excessive stress on the hand. The washer gun has a ¼-inch quick connector to establish a connection with any standard hose pipe. Likewise, it has a regulatory knob that assists in controlling the thickness of the foam. It has three nozzle tips with varying angles, making it simple to choose the right one according to the requirement.
The one-liter bottle can generate thick mounds of foam based on the setting. With the help of the three nozzle tips provided with the cannon spray gun, users can choose the one that fits the operation. A regulatory knob adjusts the thickness of the foam required, making it simple to meet the specifications as per the task. Likewise, it is possible to achieve a maximum pressure of 5.3gpm with 2,000 PSI, making it a powerful foam gun. The quick connector establishes a connection to any standard water pipe hose with ease.
HassPro foam cannon pressure gun opted for premium materials to ensure durability and longevity. The brass connectors, brass orifice, upgraded foam creator, and easily removable rugged plastic cover enhances the life of the spray gun with ease. The upgraded nozzle ensures proper flow of the mixture according to the nozzle selected for action.
- Three nozzles with varying angles of output
- Regulator to control foam thickness
- Rotary switch to control the spray pattern
- Premium brass material components extend the life
- ¼-inch steel connector for quick connection
The Foseal snow foam cannon is an ideal choice for car cleaning lovers who like to indulge in the DIY cleaning project at home. The cannon is also useful for professionals, as it fulfills the need to have a professional-grade spray gun. The quality of the product places the foam cannon positions it in such a manner that it gives a fierce competition with other products in its category.
A foam cannon with a compact design always stands out from the rest. Foseal ensured to come up with a plan that is attractive and functional at the same instance. The trendy yet handy design is simple and fulfills the need to have a powerful cannon spray gun with reduced weight. Furthermore, the company added a ¼-inch steel connector to make it simple for connecting the gun to any standard hose pipe. It uses a brass knob for adjusting the thickness of the foam and a plastic adjustment to control the spray pattern.
The one-liter canister helps in covering a complete car while producing thick mounds of foam according to the setting. One can turn the brass knob on the top to control the thickness of the foam and cover the vehicle with ease. Furthermore, it is feasible to turn-off the foam to have just water gushing out to clean the water. The ¼-inch connector connects to any water hose pipe, making it simple to begin the cleaning action. It requires 2gpm and a minimum of 1,000 PSI water pressure. The multi-purpose use of foam gun is the right addition in the home.
The use of premium materials increases the life of Foseal snow foam cannon. Brass connectors, stainless steel ¼-inch connector, rubber seals, and rugged plastic enhances the lifespan of the product irrespective of the number of uses. Dismantling the connectors is simple, which makes it simple to clean and retain its original working condition.
- ¼-inch quick connector for quick connection
- Brass knob to control foam thickness
- Spray pattern controller
- Premium materials extend the longevity of the foam gun
- Handles 2gpm and 1,000 PSI pressure with ease
The JWGJW 198 foam cannon enables both professionals and personal enthusiasts to use it for cleaning vehicles and other quick actions such as watering a garden, cleaning the stairway, and so on. The company ensured to choose an exciting design that is handy and helps in fulfilling a task with ease. Likewise, the quality of the materials used retains the original condition even after several uses.
The trendy design of the foam cannon gun makes it pleasing to the eye. It is not only simple but also apt for functioning under different circumstances. The lightweight construction helps one to maneuver the foam cannon with ease while having complete control over the foam, even at high pressure. The company opted to go with a ¼-inch steel connector at the rear. It helps a user to connect a standard hose pipe without the need to have additional accessories. Also, the use of brass connectors and rubber seals prevent leakages, making the spray gun the right choice.
The one-liter canister can complete one complete round of covering a car in foam. Provided is the foam volume control knob at the top. It helps in controlling the volume of foam or the thickness that one likes to have as a coat on the car. The spray cannon is capable of functioning at a maximum pressure of 3,000 PSI. The foam helps in removing stains without damaging the paint of the vehicle. Likewise, the cannon is useful in cleaning driveways, roofs, stairways, and so on.
JWGJW 198 foam cannon uses premium materials such as brass, stainless steel, rubber seals, and rugged plastic for extended life. The use of brass for connectors ensures longer functionality while the seals prevent leakages. It is also easy to remove the cover, reach to foam creator, clean it, and reuse after every wash.
- The ¼-inch connector connects quickly with standard pipes
- The maximum pressure it operates is 3,000 PSI
- Mesh filter helps in removing sediments that prevent scratches on the paint
- Adjustable spray nozzle controls volume and pattern
- Ideal for use at professional and personal requirements