Top 15 Best Car Buffers Polishers in 2020

Top 15 Best Car Buffers Polishers – Buyer’s Guide 2020

Buffing a car means smoothing out the surface of the vehicle by removing a thin layer of clear coat of paint. It will remove a deep stains, small scratches, and even oxidization from the paint surface.

Buffing and polishing are possible to do by hand but the results are much better and easier when a buffer or polisher is used. But even the best buffer can damage the pain job of the car if you don’t know what you are doing and how to operate the buffer.

Not only the buffer can repair and smooth out the car’s paint job, it can also be used to wax the vehicle.

Read our latest guide about the best ceramic coating for cars.

Benefits of Using Car Buffers or Polishers

It is an important question when you think about car polishers and buffers, why do you need a car polisher or Top 15 Best Car Buffers Polishers in 2020buffer.

  • Over time, the color and lustre of the car fades. A good polish will renew the color of car and make it look like new.
  • A good buffer or polisher can also fill up any scratches to make the car look smooth. Even if you take the best care of your car, the surface starts to accumulate scratches.
  • Your car surface can have deposits of mineral and water drops that aren’t easy to clean. Using a car buffer will make the cleaning easier so that you can get a uniform surface.
  • Using a car buffer or polisher will increase the durability of your car.
  • If the car’s paint job is not maintained, the shine will fade over time and it will depreciate the value of your vehicle.

Read our complete guide about the best car wash soaps.

Types of Car Polishers or Buffers

Car buffers come usually in three types – rotary buffers, random orbital buffers, and dual-action buffers.

Rotary Buffers: These buffers look like angle grinders with a fixed handle on one side. Rotary buffers spin in regular circular motion on a single axis. They are precise and powerful making them a go-to buffer for detailing professionals. Because of their high speeds and power, they generate more heat and can lead to paint damage at the hands of novice. Rotary buffers can be used to create high-gloss finish.

Orbital Buffers: In this type of buffers, the pad moves in eccentric circular patterns and is easier to operate if Top 15 Best Car Buffers Polishers in 2020you are a beginner. They can remove all defects without any swirling or streaking. As long as you handle the machine carefully, you won’t be able to do any long-lasting damage to your car’s paint job.

Dual-Action Buffers: They are the safest choice of car buffers because of their drive unit. It oscillates in circular motion which restricts the pressure applied in one place. With this specific movement pattern, the buffer can remove swirl marks and create a glossy finish. These buffers are useful for removing any difficult paint swirls and polishing.

Features to Look for in a Car Polisher or Buffer

In the world of variety of car buffers and polishers, it is necessary to know about their different features. Here are some of the features and specs that you must look for while buying the best car buffer or polisher.

Speed: It is the most important feature of a car buffer or polisher. With higher speeds, the buffer can even target deep scratches. However, greater speed also has some negative effects. Higher speed can often result in more heat and friction while polishing. Ideally, the speed of buffers and polishers should be between 1600 rpm and 4000 rpm. For personal uses, the buffer should range between 1600 rpm to 1800 rpm.

Variable Speed Control: Overall speed is important but it is also important to see if the machine offers variable speed control. With this option, you will be able to do variety of jobs with the same machine-like polishing and removing scratches.

Vibration: While the buffers and polishers are turned on, they tend to vibrate. If the vibrations are too high, it Top 15 Best Car Buffers Polishers in 2020can lead to inaccurate results. Too much vibration will also be uncomfortable and the buffer will be difficult to use. If you are planning to do fine detailing work with the buffer, it is better if you choose a polisher with minimum vibrations.

Weight: As you need to hold the buffer machine in your hands in order to work on your car, it is important that the buffer or polisher is lightweight. If the machine is too heavy, you will tire out too quickly and you won’t be able to work on your car continuously. So, the best buffer should be small and light in weight so that it offers best manoeuvrability.

Dual Handles: Polishing your vehicle is a time-consuming job. So, you need to make sure that the machine is comfortable and lightweight. A dual handle will make the buffer machine much easier and more convenient to use as you will be able to hold it with both hands. Along with dual handles, if the handles are adjustable, then you will be more comfortable while operating the machine.

Ergonomics: Whether the machine has single handle or it has dual handles, ensure that the grip is secure. A poor grip can lead to inaccurate results.

Corded vs. Cordless Buffers: Just like most things in modern world, the buffers also have an option of being wired and wireless.

  • Corded Buffer – They are more powerful as they are directly connected to the electrical line. Corded buffers can deliver higher rpms and as they don’t have a battery, they can be potentially lightweight.

Corded buffers do restrict movement because of the power cord attached. The manoeuvrability is limited by the length of the cord.

  • Cordless Buffer – These buffers offer more convenience. Without the restrictions placed by a power cord, you can move around your vehicle more easily. Latest cordless buffers come with Li-ion batteries Top 15 Best Car Buffers Polishers in 2020which can last for a longer time on a single charge as compared to their predecessors.

Cordless buffers are less powerful than the corded buffers. Also, they weigh more because of the built-in battery.

Included Accessories: Accessories are generally limited and they include small number of polishing bonnets, cloths, and microfiber materials. Not all buffers come with a starter kit but the accessories are available separately.

Other Features: Other than the above-mentioned features, you can also look for a buffer with automatic shutdown ability that will turn off the buffer in case of overheating. Buffers with counterweight mechanism won’t allow the machine to damage the paint. A buffer with soft-start capability will make the machine safer to operate.

All this basic information about the features of buffers or polishers will serve as a starting point in helping you to choose the right machine for you. Although there are several great options in the market, we have selected the best buffers or polishers that you can check out.

Frequently Asked Questions (FAQs)

What are the types of buffing pads?

There are three different types of buffing pads which can be attached to the buffer. These are wool, foam, and microfiber buffing pads. As long as the diameter of the pad is equal to or greater than the backing plate of your buffer, you can use either of the pads.

Can I use a buffer to wax my car?

Yes, it makes the whole process much faster and efficient. Simply apply the wax on the buffer’s pad and apply the wax to your car with the buffer. Once the application is complete, take-off the wax applicator and replace it with aTop 15 Best Car Buffers Polishers in 2020 wax removal cloth on the backing plate. Now, use the buffer again to remove the dried wax using long strokes.

Buffer vs Polisher – Are these two different machines?

Both mean the same. When you are buffing or polishing a surface, you are essentially making it smooth and free of defects.

Can I use a buffer to polish car windows?

Yes, you can use a buffer to get rid of the apparently permanent water spots and even some light scratches. Make sure the you apply a thin coat of wax after polishing to keep the windows clean.

Top 15 Best Car Buffers Polishers in 2020

ImageProduct NameKey FeaturesRating
1. TORQ – BUF503X Random Polisher with Kit3 Hex Logic buffing and polishing pads 4.7

2. Porter-Cable – 7424XP 6-inch Variable Speed Buffer

Accepts 5/16 – 24 spindle thread accessories 4.6
3. VViViD – REV Power Tools SPDPO180 7-Inch Hand-Held Polisher and Buffer 2,500 to 6,800 RPM4.6
4. TACKLIFE – PPGJ04A 6-Inch/5-Inch Dual Action Random Orbital Car Polisher Side handle and a D-handle4.5
5. XtremepowerUS – Portable Orbital Cordless Buffer/Polisher DC 18V; 3.3Amp Motor4.5
6. Milwaukee – 2738-20 M18 FUEL Brushless Cordless 7-inch Variable Speed Polisher Lock-on/lock-off switch 4.4
7. GK GOLDKIN – 7-Inch Rotary Orbital Polisher 16.4 ft plus long thick copper wire 4.4
8. Black & Decker – WP900 6-inch Random Orbit Waxer/Polisher 4,400 orbits per minute4.4
9. TACKLIFE – PPGJ01A Variable Speed Buffer Polisher, 7-Inch/6-Inch 3* Sponge wheel4.3
10. WEN – 948 10-Amp Variable Speed Polisher Onboard digital readout4.3
11. C P CHANTPOWER – 6 Inch Dual Action Car Polisher with Variable Speed Compact light design4.2
12. WEN – 6010 6-Inch Waxer-Polisher Lockable ON/OFF Switch 4.1
13. Avid Power – AEP142 7-Inch Variable Speed Buffer Polisher 5/8-inch grinder spindle4.1
14. WEN – 10PMC 10-Inch Waxer-Polisher 3200 orbits per minute4.0
15. Armor All – AA10BP, 10-inch Orbital Car Buffer/Polisher 12 Inch Pigtail Power Cord3.9

1. TORQ – BUF503X Random Polisher with Kit

TORQ BUF503X Random Polisher can polish and remove swirls, scratches, and defects from all painted cars and TORQ – BUF503X Random Polisher with Kitvehicles. The power tool is ideal for beginners as well as professionals in industry because of its lightweight nature and powerful motor.

Type of Buffer

TORQ BUF503X Random Polisher is a dual action polisher with 8mm dual orbital throw. The compact design is powerful and consistent. It has a balanced ergonomic design (BED) which makes the unit comfortable and convenient to handle. It has electronic control system that increase power gradually upon start with the built-in Precision Power (P2) controller. It has easy to use features for detailing and delivers dynamic performance. The power tool is corded with power supply coming from AC supply.

Speed and Motor

TORQ BUF503X Random Polisher is equipped with 680W motor that runs on 120V. It delivers needed torque and power for any application. You can use it to apply wax, sealants, and glaze in minutes. The motor has a wide power band in the range of 2800 RPM to 7800 RPM. The range is ideal for polishing, waxing, scrubbing, and cleaning.

Buffer Design

TORQ BUF503X Random Polisher is designed with streamlined controls for maximum comfort while you are buffing any automobile surface. It is manufactured with intuitive controls and rugged components. It is built with durable materials that can last for years and offer you dependable detailing tool. The tool has a tight form factor and precision balance which fits in the hand of the user. The buffer weighs 8.6 pounds and it is lightly heavier than other buffers in the market. The backing plates can be switched between 3-inch, 5-inch, and 6-inch size with the use of Streamlined Integration engineering.

Additional Features

TORQ BUF503X Random Polisher comes with a Polisher Kit. It includes three Hex Logic buffing pads for butting, polishing, and finishing. There are V-Line sampler of compounds and polishes for removing swirls and scratches. Orange Hex-Logic Cutting Pad can be used to remove swirls, scratches, and oxidation to restore deep gloss and pure reflection to painted surfaces. The White Hex Logic Polishing Pad can remove heavy compounding marks and the Black Hex Logic Finishing Pad is useful for spreading sealant or wax on the surface. the tool uses standard 5/16” – 24 spindle thread backing plates.

Highlights

  • Random orbital buffer with 680W motor
  • Speed varies between 2800 RPM to 7800 RPM
  • Lightweight construction with vibration reduction technology
  • Buffer designed with streamlined controls

2. Porter-Cable – 7424XP 6-inch Variable Speed Buffer

Porter-Cable is one of the first companies that launched commercial polisher. Porter-Cable 7424XP is a car Porter-Cable – 7424XP 6-inch Variable Speed Bufferpolisher that is useful for both marine and automotive applications. With this tool, you can remove even more paint imperfections at a faster rate.

Type of Buffer

Porter-Cable 7424XP is a random-orbit, swirl-free polisher. The buffer has a random orbit, swirl-free sanding action. The random orbital action of the polisher generated very little heat while buffing up. It will not burn the paint unlike with the rotary buffer. The buffer has a full ball and roller bearing construction that increases durability of the tool under industrial workloads. The construction also features spiral/bevel gears. It is a corded buffer model and while it doesn’t offer the convenience of wireless models, it comes with a 2.4-meter-long power cord. With all this length, the ease of movement is not at all restricted.

Speed and Motor

The Porter-Cable buffer runs on 4.5-amp motor and on direct power only at 120 volts. With the 4.5-amp motor, you can polish out swirls, water spots, oxidation, and scratches faster than before. It comes with an electronic variable-speed dial. The speed ranges from 2500 OPM (orbits per minute) to 6800 OPM. It works at higher speeds than its predecessor, 7424 model. It also has a high overload protection so that it does not overheat. The buffer has an 8 mm throw which offers huge flexibility to access all nooks and crannies on the paint job of your vehicle.

Buffer Design

Porter-Cable 7424XP features a proprietary counter balance for use. It has a 6-inch sanding and polishing pad. For additional comfort while using, the buffer uses a 2-position (left or right) removable side handle. As the handle can be moved to either side of the tool, it won’t matter if you are left-handed or right-handed. With the additional handle, you can control the machine in a better way. The body of the buffer has improved ergonomics and switch design. The buffer just weighs 5.5 pounds and it measures 11.5 inches in length, and 6-inches in height.

Additional Features

The Porter-Cable buffer comes with a 6-inch polishing pad. You can buy additional accessories whose size ranges between 5/16” to 24” spindle thread. The buffer comes with a removable side handle for extra support, a wrench, and its operating instructions. The Porter-Cable tool is backed by 3-year limited warranty which covers any defects due to faulty manufacturing. It also covers one-year free service contract where the company will maintain the tool and replace worn parts after normal use.

Highlights

  • Random orbital corded buffer with 4.5-amp power motor
  • Buffer accepts a 5/16-24 spindle thread
  • Diameter of the pad is 6-inches
  • Electronic variable speed between 2500 OPM to 6800 OPM

3. VViViD – REV Power Tools SPDPO180 7-Inch Hand-Held Polisher and Buffer

VViViD REV Power Tools SPDPO180 Polisher will allow you to buff like a pro and get a perfect finish with the VViViD – REV Power Tools SPDPO180 7-Inch Hand-Held Polisher and Bufferbuffer every time. The buffer or polisher is ideally suited for cars, trucks, and even motorcycles. You can also use it to buff the countertops, bathroom fixtures, and even banisters.

Type of Buffer

VViViD REV Power Tools SPDPO180 Polisher has a floating spindle design which prevents damage to your vehicle’s paint job. The design will help in preventing from you applying too much pressure while buffing and polishing.

Speed and Motor

The polisher has a variable-speed motor which feature six different speed settings. You can select speeds between 2000 RPM to 6400 RPM. The REV 6” Random Orbital Polisher has a 700W motor with dual action movement pattern. With this buffer, you can get a streak-free finish every time you use the buffer. The motor runs at 5.7-amps.

Buffer Design

The VViViD REV Power Tools SPDPO180 features a reversible hand-grip handle. It offers greater control and comfort while using. The removable handle can be mounted on one of the three different sides – left, right, and top. The buffer is designed with a highly impact-resistant casing which minimizes vibrations to your hands. With minimal vibrations, the buffing action will be accurate and you won’t be able to burn through the paint jobs. The buffer has a durable and lightweight design which gives you maximum control and comfort.

Additional Features

The VViViD REV Power Tools includes a 7-inch diameter synthetic wool pad. It will minimize the risk of scratches. You can even use the tool to apply waxes, sealants, and glazes. The buffer is compatible with 7-inch and 8-inch buffer pads. It can accept accessories with spindle thread that measure 5/8” – 11” in size. The backing plate of the tool has Velcro to attach the pads.

Highlights

  • Random orbital corded buffer
  • 700W power with 5.7-amp motor
  • Buffer accepts a 5/8-11” spindle thread
  • Diameter of the pad is 6-inches
  • Electronic variable speed between 2000 RPM to 6400 RPM

4. TACKLIFE – PPGJ04A 6-Inch/5-Inch Dual Action Random Orbital Car Polisher

TACKLIFE PPGJ04A Dual Action Random Orbital Car Polisher is perfect for polishing your vehicle and remove TACKLIFE – PPGJ04A 6-Inch/5-Inch Dual Action Random Orbital Car Polisherany swirls, scratches, and defects. You can re-gain the shine of the paint job of the vehicle. It can also be used to sand wood or metal surfaces.

Type of Buffer

TACKLIFE PPGJ04A is a dual action polisher with random orbital movement of the buffer. It has a variable 6-speed control dial that allows you to adjust the car polisher speed. It helps in adjusting the speed for different applications. There is no load speed in the tool and it has a soft-start design. As it is a random orbital buffer, there is no overheating of the unit and there is minimal risk of burning through the paint. It is a corded buffer with a power cord length of 10 feet.

Speed and Motor

TACKLIFE PPGJ04A Dual Action Random Orbital Car Polisher has a 6.5-amp motor that is powerful and ideal for polishing and removing swirls. The buffer has a speed variation in the range of 1500 RPM to 6400 RPM. Low speed is ideal for waxing and buffing. The tool can be used at a medium speed for polishing while high-speed for removing paint defects and scratches. The car buffer can also be used to remove oxidation from the layer of paint. It has a 9mm long-throw orbit.

Buffer Design

TACKLIFE PPGJ04A Dual Action Random Orbital Car Polisher is designed ergonomically. The tool has low noise, low vibration, and lightweight (7.2 pounds) which can help you to get the job done with more comfort. It has a side handle and a D-handle which makes using of the buffer more comfortable and convenient. You can hold the buffer from either or both handles, whichever way makes you more comfortable and is easy to operate. It also has interchangeable polishing pads which come in two sizes – 5-inch and 6-inch. Both have a thread size of 5/16 inch. The buffer has a lockdown button option which allows you to maintain constant power and speed which makes the operation steadier.

Additional Features

TACKLIFE PPGJ04A Car Polisher comes with a packing bag, 5-inch polishing base pad, 6-inch polishing base pad, four foam disks, and a pair of carbon brushes. It also includes a wrench and allen key for fixing the pads. For your safety, hand protection cover is also included with the buffer.

Highlights

  • Dual action random orbital corded buffer with 6.5-amp power motor
  • Replaceable backing plate with two polishing pads – 5” and 6”
  • No loading variable speed between 1500 RPM to 6400 RPM

5. XtremepowerUS – Portable Orbital Cordless Buffer/Polisher

XtremepowerUS Portable Orbital Buffer is a useful in multitude of applications like polishing furniture, XtremepowerUS – Portable Orbital Cordless Buffer/Polisherautomotive, metal, bronze, kitchen appliances, even polishing of special surfaces. Primarily, the tool is useful for buffing automobiles, boats, motorcycles, and even planes.

Type of Buffer

XtremepowerUS Portable Orbital Buffer has a random orbital movement with a cordless design. The buffer can be used to create a clean and reflective shine on different surfaces. It runs on DC 18V Ni-CD battery. The battery needs to be charged for 5 to 7 hours and runs for about 2 hours after charge. The random orbital motion of the tool is optimal movement to achieve a swirl-free finish. It has a 3.3-amp motor that runs smoothly to buff the paint job of your vehicle. As it is a cordless, there is no restriction of movement and you can move around without worrying about the tangling cords.

Speed and Motor

XtremepowerUS Portable Orbital Buffer runs at a fixed 3300 OPM speed. At this speed and the random orbital movement of the buffer, there is no risk of burning through the paint job of the vehicle. So, even if you are a beginner, there is no risk.

Buffer Design

XtremepowerUS Portable Orbital Buffer is designed with two handles to provide less fatigue and more ease of use. With the ergonomic front and rear handles, you can use it with single hand or with two hand operations. The tool has a special design that keeps the unit stable. It has a compact design that is more convenient than some other waxing tools. Low vibration of the motor also reduces stress on hands and it adds on the comfort while you are using the tool. It has a finger trigger switch for easy access and control of the tool. The XtremepowerUS Portable Orbital Buffer is made from high-impact resistant ABS plastic shell and it offers superior tensile strength.

Additional Features

XtremepowerUS Portable Orbital Buffer comes with a 10” diameter form, terry cloth, microfibre cloth, and charger plug. You can buy replacement 18V Ni-CD batteries for this buffer. The cloths are washable and can be reused.

Highlights

  • Random orbital cordless buffer
  • Battery is replaceable
  • It has a 3.3-amp power motor
  • Comes with a 10” backing plate
  • No variable speed, fixed speed at 3300 OPM

6. Milwaukee – 2738-20 M18 FUEL Brushless Cordless 7-inch Variable Speed Polisher

Milwaukee 2738-10 M18 FUEL Cordless Variable Speed Polisher is perfect cordless buffer to polish and buff your Milwaukee – 2738-20 M18 FUEL Brushless Cordless 7-inch Variable Speed Polishervehicle in a single charge.

Type of Buffer

Milwaukee 2738-10 M18 Cordless Variable Speed Polisher is a cordless full-size rotary polisher. The polisher harnesses the power, performance, and run-time of M18 FUEL technology. It delivers corded performance in a cordless setup. Using this tool, you can power through the most demanding applications without needing to charge. The buffer is equipped with M18 XC5.0 batteries and they have enough power to buff and polish a full-size car on one charge. As it is a cordless setup, it frees you from any distractions and inconvenience caused by power cords. You can move around freely without being limited by length of cord.

Speed and Motor

Milwaukee 2738-10 M18 Cordless Variable Speed Polisher delivers constant power technology. It has a variable speed dial and trigger that offers total control on the speed of the buffer. The speed ranges from 600 RPM to 2200 RPM. The higher end of the speed is ideal for most buffing applications. If you apply a pressure down on the buffer, it does not affect the speed of the buffer. As compared to other buffers, it produces more sound.

Buffer Design

Milwaukee M18 Cordless Variable Speed Polisher is made with ABS plastic. It has a sensitive trigger that kicks into high gear as soon as the tool is powered on. It has a lock-on/lock-off switch. The M18 FUEL Polisher is equipped with a rubber over mold front housing that protects the car paint from scratches while using the buffer. The tool is constructed with a design to distribute more of its weight over the pad. It will provide more natural pressure on the surface area of the pad. The tool is approximately 1 pound lighter than any corded buffer setup even with the battery on.

Additional Features

Milwaukee 2738-10 M18 Cordless Variable Speed Polisher comes with a backing plate on which pads can be attached with Velcro. You can attach any 7-inch hook & loop buff pad on the buffer. It has a standards 5/8”-11 shaft. It also comes with a removable dust cover to protect the motor and electronics from wool fibres and residue while you are not using the tool. The polisher is covered under 5-year Milwaukee factory warranty.

Highlights

  • Variable speed polisher with cordless design
  • Battery is replaceable
  • The buffer has 5.0-amps motor
  • Buffer has a 7” pad capacity
  • Variable speed in the range of 500 RPM to 2200 RPM

7. GK GOLDKIN – 7-Inch Rotary Orbital Polisher

GK GOLDKIN Rotary Orbital Polisher is a powerful and durable tool that can be used to polish car, sanding, GK GOLDKIN – 7-Inch Rotary Orbital Polisherwaxing, sealing glaze, furniture, and even polishing home appliance. It can also be used to apply brightness of glass. The random orbital polisher is ideal for removing deep paint scratches, swirls, and oxidation.

Type of Buffer

GK GOLDKIN Rotary Orbital Polisher is a buffer with random orbital movement of the buffing pad. The buffer is a corded variant that comes with a 16.4 feet long thick copper wire. The long length of cable increases the working range so that there is no need to plug and unplug multiple times. Wire used in the tool is thick and it ensures stability of power.

Speed and Motor

GK GOLDKIN Rotary Orbital Polisher uses constant power constant speed technology. It uses a 12.7-amp 1400-watt pure copper motor and it has a die cast aluminium head. The motor has heat treated precision cut gears that can withstand heavy and long-term use. The buffer has an option of variable speed. Six speed settings allow the user to change the speed from 600 RPM to 3000 RPM. You can control the speed of the buffer based on the intensity of the polishing job. The speed can also be changed based on how deep the polishing materials are to move into the car.

Buffer Design

GK GOLDKIN Rotary Orbital Polisher has an anti-impact ABS housing for the motor. The lock switch offers stable use and the soft start feature is added as an additional safety option. It allows the buffer to run quickly. The tool starts off slow and progressively moves its speed to proper preset level. It also has a carbon brush light indicator that tells you when you need to replace the carbon brush of the buffer. It has an ergonomic detachable front handle which features a ‘D’ style and side straight handles. The handles are wrapped with silicone material which ensures that the vibrations are minimalized and it makes the tool more comfortable.

Additional Features

GK GOLDKIN Rotary Orbital Polisher has a 7-inch Loop Backing Plate and it is wrapped in soft PU material. It makes the polishing more uniform. The buffer comes with a wool foam, waffle foam, smooth foam, screws, allen wrench, carbon brush, and a foldable bag for storage.

Highlights

  • Random orbital corded buffer with 12.7-amp 1400-watt motor
  • Diameter of the backing plate is 7-inches
  • Variable speed between 600 RPM to 3000 RPM
  • Soft start feature with constant power and constant speed
  • Durable power cord with long length

8. Black & Decker – WP900 6-inch Random Orbit Waxer/Polisher

Black & Decker WP900 Random Orbit Polisher is a comfortable and easy to use buffer that can help you buff, Black & Decker – WP900 6-inch Random Orbit Waxer/Polisherpolish, and wax with ease. It’s a versatile polisher with easy to use features and reacts well under pressure. The body of the buffer is compact but lacks variable speed capacity.

Type of Buffer

Black & Decker WP900 Random Orbit Polisher has a random orbiting movement pattern that gives you a swirl-free finish. The random movement also ensures that the results are always burn-absent. Even beginners can operate the tool without worrying about burning through the paint job. The buffer comes with a 10-feet power cord that can easily accommodate car and boat polishing without getting tangled in cords. The cord is connected to the back of the polisher so that it will never get in the way of working.

Speed and Motor

Black & Decker WP900 Random Orbit Polisher runs at random orbit movement at 4400 orbits per minute (OPM) to give you a swirl-free finish. The motor is locked at 4400 OPM and it lacks any kind of speed control. This speed is ideal for basic detailing. WP900 is not suitable for fixing deeper scratches and other noticeable swirl marks.

Buffer Design

Black & Decker WP900 Random Orbit Polisher has a comfortable two-handle design. The buffer has an overall ergonomic design and it reacts well with extra pressure. It significantly reduces fatigue while using the machine for long times. The buffer is easy to handle with a vertical and horizontal angle. The tool needs to be operated with both hands all the time. The polisher is quite lightweight at 5.3 pounds and has a compact size as compared to many other buffers in the market.

Additional Features

Black & Decker WP900 Random Orbit Polisher includes foam applicator bonnet for easily applying wax or polish. A wool polishing bonnet is also included to deliver a high-quality finish. The buffer has a 6-inch backing plate and 6-inch pads. The larger covered surface means that there are lesser chances of needing multiple polishing attempts. The buffer is covered under 2-year limited warranty.

Highlights

  • Random orbital corded buffer with one speed of 4400 OPM
  • Comes with two polishing bonnets and one applicator bonnet
  • Handles have a rubber coating for secure grip
  • 10-foot long cord length
  • Ideal for light detailing work on vehicle

9. TACKLIFE – PPGJ01A Variable Speed Buffer Polisher, 7-Inch/6-Inch

TACKLIFE PPGJ01A Variable Speed Buffer Polisher is designed to make your life simple by speeding up detailing TACKLIFE – PPGJ01A Variable Speed Buffer Polisher, 7-Inch/6-Inchprocess and making buffing of the paint job so much easier. As compared to other random orbital polishers, TACKLIFE Variable Speed Buffer can polish deeper scratches.

Type of Buffer

TACKLIFE PPGJ01A Polisher is a variable speed polisher. It is a corded buffer with a power cord length of 10-feet. The buffer has option to choose between 6 speeds in the range of 1000 RPM to 3000 RPM. For waxing and buffing, 1000 RPM and 1400 RPM setting is ideal. You can do polishing and cleaning at 1800 RPM and 2200 RPM. To remove any deep scratches and paint defects, you can go up to 2600 RPM and 3000 RPM.

Speed and Motor

TACKLIFE PPGJ01A Variable Speed Buffer Polisher comes with a powerful 12.5-amp 1500 W motor. It has an all ball-bearing construction which gives the tool long life and better performance for even the most demanding applications. It has a digital screen indicator that shows precise 6 variable speed dial. You can set buffer speed between 1000 RPM and 3000 RPM. The choice of speed depends on the intended application. The buffer with its variable speed range is ideal for car sanding, polishing, waxing, and work on other surfaces like wood, marble, and even walls.

Buffer Design

TACKLIFE PPGJ01A Variable Speed Buffer Polisher is designed with a detachable side handle and an ergonomic design. There are two handles on the tool – side handle and a D-handle. You can choose to hold the tool in way that is most comfortable for you. It also has a built-in LCD display that can show the accurate speed control of the unit. The buffer also has a safety-lock switch which can conveniently maintain one speed throughout for as long as needed. It also has a built-in LED light for better visibility in enclosed or dark work spaces.

Additional Features

TACKLIFE PPGJ01A Variable Speed Buffer Polisher comes with two replaceable paste trays (7-inch and 6-inch), 10 sandpapers, 3 sponge wheels for waxing, wool polishing disk, pair of carbon brushes, chuck key, and a user manual.

Highlights

  • Variable speed corded buffer with 12.5-amp powerful motor
  • Replaceable paste trays with two sizes – 6” and 7”
  • Variable speed between 1000 RPM to 3000 RPM
  • LCD monitor to see the variable speed of the tool
  • LED light for better visibility

10. WEN – 948 10-Amp Variable Speed Polisher

WEN 948 Variable Speed Polisher is perfect for finishing, compounding, waxing, polishing, buffing, and removing WEN – 948 10-Amp Variable Speed Polisheroxidation from surfaces.

Type of Buffer

WEN 948 is a variable speed polisher with no random orbit. It has a soft start which ensures that the speed does not damage the paint accidently. It is a corded electric buffer that is housed in an aluminium body. The power cord is 6 ½ feet long and the tool works with AC 110V power.

Speed and Motor

WEN 948 Variable Speed Polisher has a variable speed range that goes from 1500 RPM to 3500 RPM in increments of 500 RPM at each level. With different speeds, you can polish different parts of your car easily. It can even be used to clean mats, car seats, headlights, and carpets. You will be able to polish different surfaces without having to buy different tools for each surface. The buffer is built with a 10.0-Amp motor that delivers reliability and power that is perfect even for professional buffing jobs.

Buffer Design

WEN 948 Variable Speed Polisher comes with a durable construction and design. It has a solid mounted handle which is useful for holding the buffer comfortably and conveniently. The large handle gives users a freedom of applying needful pressure wherever needed. It can be useful when you’re trying to get the most difficult scratches. The unit has an onboard digital readout that illuminates the current RPM for better accuracy and precision of the motor. The buffer weighs 5.7 pounds and it has noise levels that are higher than many others in the market.

Additional Features

WEN 948 Variable Speed Polisher includes a woollen fleece polishing bonnet, a handle, and a hook & loop base pad. You can attach hook & loop backed 7-inch accessories to the buffer. You can even attach a sandpaper to the base pad to convert it into an industrial sander. The hook & loop base makes switching of polishing pads convenient and easy. The power tool is backed by a 2-year warranty. The buffer has a shaft with 0.78 diameter and 5/8-11 thread size.

Highlights

  • Random orbital buffer with 10.0-Amp motor
  • Corded buffer that runs on AC power
  • Speed varies between 1500 RPM to 3500 RPM
  • Buffer includes an onboard digital readout

11. C P CHANTPOWER – 6 Inch Dual Action Car Polisher with Variable Speed

CP CHANTPOWER Dual Action Car Polisher is a multi-function use buffer that delivers excellent results for C P CHANTPOWER – 6 Inch Dual Action Car Polisher with Variable Speedpolishing vehicles and boats. It can also be used to polish wooden furniture, marble, and even granite. The buffer can be used by a beginner or even professional.

Type of Buffer

CP CHANTPOWER Car Polisher is a dual action polisher with six variable speed. The dual action polisher moves in random orbits in two 360 degrees circles where the circle diameter is 2.5”. Because of the random orbit movement, there is no risk of burning through your vehicle’s paint. It’s a corded buffer that runs on 120V, 60Hz AC power. The power cord is 9.8 feet long so that you can conveniently move around while polishing the vehicle.

Speed and Motor

CP CHANTPOWER Dual Action Car Polisher has a 5.0-Amp 600W powerful motor. The buffer has six variable speed options. You can set the speeds from 1500 RPM to 6800 RPM. You can set the speeds of the buffer easily by manually turning the knob. The dial is conveniently located and you can adjust the speed according to the materials and intended application. Speeds of 1500 OPM and 3000 OPM are ideal for waxing and buffing. At 3500 OPM and 4500 OPM, you can polish and buff the vehicle paint job. Paint defects and oxidation can be removed from the paint jobs at 5500 OPM and 6800 OPM speeds.

Buffer Design

CP CHANTPOWER Dual Action Car Polisher has an ergonomic design. It is a compact polishing tool with a light design that allows you to polish, buff, and finish different surfaces. Even if you are working for a long time for buffing, you will be comfortable and the polishing is convenient. The polisher can be held in perfect grip by adjusting swivel D-handle and interchangeable side handle. The handles have a rubber grip. It has a soft-start function that creates less vibration in the tool and extends the life of the buffer. A simple on/off switch also ensures safe operation. The buffer weighs 7.15 pounds.

Additional Features

CP CHANTPOWER Dual Action Car Polisher comes with three pads. It includes a microfiber wash mitt, towel, detachable side handle, sponge polishing pads, spanner, hex wrench, and a user manual. The polishing tool is covered under 2-year limited warranty. The buffer has a 7-inch diameter of the polishing pad. You can simply attach a grinding disk to the Velcro sticker on the backing plate.

Highlights

  • Dual action car polisher with 5.0-Amp 600W powerful motor
  • Variable speed between 1500 RPM to 6800 RPM
  • Corded buffer with 9.8-feet cord length
  • All the pads are 7-inch in size

12. WEN – 6010 6-Inch Waxer-Polisher

WEN 6010 Waxer-Polisher can be used to polish and buff many different types of surfaces including your vehicle WEN – 6010 6-Inch Waxer-Polisherto surfaces in your kitchen, bathroom, and even banister. It will leave a smooth and shining surface by removing the dullness and grime.

Type of Buffer

WEN 6010 Waxer-Polisher is a random orbital buffer. It is delicate enough for any paint job and powerful enough to remove any stain and scratches from the surface. the random orbital movement pattern provides a streak-free, swirl-free shine to the finish of your vehicle. It allows continuous workflow without having to turn off as it does not over heat. It is a corded buffer that runs on AC supply. The power cord is 5-1/2-feet long. It is not as long as many other buffers but the lesser length is convenient in case of compact cars.

Speed and Motor

WEN 6010 Waxer-Polisher is equipped with a high performance 120 V, 0.5-Amp permanent magnet motor. It has a linear power output which implies that there is no adjustment option like many other buffers in the market. Despite that, the buffer can be used to polish a whole full-size vehicle. It is ideal for heavy duty waxing and polishing. The buffer runs at a constant speed of 4000 RPM and it does not have a variable speed.

Buffer Design

WEN 6010 Waxer-Polisher is ergonomically designed with a contoured palm and body-grip design. It increases the overall accuracy and control of the buffer. It is comfortable to use either with one hand or two hands. The buffer has a lockable on/off switch so that you can maintain a constant power. It’s a compact and lightweight buffer that just weighs 3.35 pounds. The design of the buffer is ideal for short waxing and polishing jobs and the unit can handle a bit of pressure too.

Additional Features

WEN 6010 Waxer-Polisher includes a 6-inch applicator bonnet and a 6-inch terry cloth bonnet. The applicator bonnet can be used for applying polish or wax and the terry cloth bonnet can be used for buffing. There is no Velcro backing and the accessories are bonnet-fit only.

Highlights

  • Random orbital corded buffer with 0.5-Amp motor
  • Includes a 6-inch applicator bonnet
  • Contains a 4000 RPM motor
  • No adjustable speed regular as it is a linear power motor
  • Power cord length is 5 ½ feet which is not too long as compared to others

13. Avid Power – AEP142 7-Inch Variable Speed Buffer Polisher

Avid Power Variable Speed Buffer can be used for vehicle polishing as well as polishing your furniture and marble Avid Power – AEP142 7-Inch Variable Speed Buffer Polisherflooring. The polisher has a soft start trigger that can ensure that the vehicle’s paint job is not damaged even when a beginner is using it.

Type of Buffer

Avid Power Buffer is a variable speed buffer with different speed control. It is a buffer that is externally powered from electric source. it comes with a 23 feet long power cord so that you don’t need to change power points while working on buffing your vehicle. The tool is easy to control even with a powerful motor because of its unique design of handles that are easy to adjust.

Speed and Motor

Avid Power Variable Speed Buffer is manufactured with a 12-Amp motor. It is a powerful motor that can buff and polish your vehicle easily. The polisher is equipped with 5/8-inch grinder spindle that makes the buffer deliver more power and ensure a long life. It has a variable speed control that ranges between 600 RPM to 3200 RPM. The tool is equipped with a 6-speed control dial so that you can adjust the car polisher speed according to your desired application. There are 6 speed settings – 600 OPM and 1100 OPM for waxing and buffing. 1600OPM and 2100 OPM for polishing and cleaning. Paint defects and oxidation can be removed at either 2600 OPM and 3200 OPM. At high speed, it can be a bit noisy.

Buffer Design

Avid Power Variable Speed Buffer is designed with two adjustable handles. There is a detachable D-handle and a side handle. They are easy to disassemble which can reduce overall fatigue and improve your work efficiency. As they are both adjustable, you can change the orientation as per your needs. It has a unique motor design and interior structure. The unique design ensures that there is lesser vibration in the buffer. Lowering of vibration amplitude can lead to comfortable working experience especially in long time polishing jobs. The buffer is designed with a trigger locking system and a trigger switch. The buffer weighs 8 lb 4 oz making it slightly bulky than others in the market.

Additional Features

Avid Power Variable Speed Buffer comes with a backing plate and wool bonnet. You can buy other accessories with a spindle thread size of 5/8-inch (16mm). The disc diameter for this buffer is 7-inch and you can buy any accessories that match to this size.

Highlights

  • Variable speed corded buffer with 12-amp powerful motor
  • A backing plate with spindle thread size of 5/8-inch
  • Variable speed between 600 RPM to 3200 RPM
  • Two easy to adjust handles for comfortable tool application

14. WEN – 10PMC 10-Inch Waxer-Polisher

WEN 10PMC Waxer-Polisher is a great choice for polishing and buffing not just cars, but also countertops, WEN – 10PMC 10-Inch Waxer-Polisherbathrooms, and even banisters.

Type of Buffer

WEN 10PMC Waxer-Polisher is a random orbital waxer that works great on all types of surfaces. The orbiting movement of the buffer makes sure that even the beginners cannot burn through the paint job of your vehicle. As it is a random orbital polisher, it is impossible to get swirl marks while buffing. The buffer is powered by AC power and it has a 6-feet long heavy-duty cord.

Speed and Motor

WEN 10PMC Waxer-Polisher is a high-performance power tool with a 0.75-Amp permanent magnet motor. The buffer runs at 3200 orbit per minute (OPM). It’s a fixed speed motor that runs on the same speed.

Buffer Design

WEN 10PMC Waxer-Polisher is manufactured with durable materials. It has a high-impact insulated housing. There are two handles with rubber coating so that they are easy and convenient to handle. It has an on/off switch that locks in by itself. The compact polisher weighs 3.08 pounds.

Additional Features

WEN 10PMC Waxer-Polisher includes two applicator bonnets, two polishing bonnets, two wool blend polishing bonnets, one wool blend washing mitt, and blow molded carrying case for safe keeping. You buy other accessories which can be attached to backing plate with bonnet attachments.

Highlights

  • Random orbital buffer with 0.75-Amp motor
  • Corded buffer with 6-feet long power cord
  • Fixed speed motor that runs on 3200 OPM speed

15. Armor All – AA10BP, 10-inch Orbital Car Buffer/Polisher

Armor All AA10BP is a versatile buffer for automobiles, boats, or other recreational vehicles. Its unique style Armor All – AA10BP, 10-inch Orbital Car Buffer/Polisherdesign offers a full range of motion for different applications.

Type of Buffer

Armor All AA10BP is a random orbital buffer where the buffing pad moves in a random orbiting movement pattern. It delivers a swirl-free shine without risk of burning the paint through. The buffer is corded with a 12-feet Pigtail Power Cord. It has ample length that allows you to move freely around the vehicle while polishing. It is also not too long so that you get tangled in it all the time.

Speed and Motor

Armor All AA10BP has a Variable Speed Control. The speed varies between 1700 OPM to 3300 OPM. It has a 1.0-Amp motor that runs on 120V and 60Hz. The variable speed dial can be easily adjusted according to the task at hand. It’s a low power motor so even beginners can use it without risking their vehicle’s paint work.

Buffer Design

Armor All AA10BP is constructed with an ergonomic handle design. It is a wheel style handle which is comfortable to hold and the tool is easy to operate thereby. The ergonomically designed handle is useful for even pressure and comfort. It has an anti-vibration rubber handle so that your hands are fatigued less. The buffer has an easy on/off slide switch which is easy to control. It is a compact lightweight buffer that weighs 5.25 pounds. The buffing wheel is water resistant.

Additional Features

Armor All AA10BP comes with a terry cloth bonnet for applying wax and a soft buffing bonnet. The microfiber bonnet delivers a consistent and smooth finish. You can buy additional accessories with a standard 10-inch polishing pad.

Highlights

  • Random orbital buffer with 1.0-Amp motor
  • Corded buffer with 12-feet long power cord
  • Speed varies between 1700 OPM to 3300 OPM

Leave a Comment

Your email address will not be published. Required fields are marked *