Automotive multimeters are used to measure electrical characteristics of a circuit. They measure capacitance, resistance, and voltage. You should get yourself the best automotive multimeters for two reasons;
Vehicle’s health – When you look after your car you require special tools for various systems and components. The multimeter is one of the tools required to check the health of the electrical system. This tool can help you spot a dying battery before it happens.
Save money – Many professional mechanics talk about the electrical system as though it is witchcraft. This tool unveils the mystery and helps you isolate the issues that need repairing. Most components are very cheap and easy to replace by yourself saving a bundle.
Read our latest guide about the best power inverter reviews for cars.
Types of the best automotive multimeters
There are two types of automotive multimeters;
Digital – Most automotive multimeters have a digital display. It looks very much like the calculator and maybe backlit for enhanced visibility. The display indicates the reading in digits and the measurement parameter. Some multimeters have a hold feature – it freezes the screen and records the measurements eliminating the need for paper and pen.
Auto-ranging – The automotive multimeters developed in the last decade have the auto-ranging feature. It saves you a lot of time while measuring and diagnosing electrical issues. This feature figures out the range you are working in and adapts. This smart feature prevents the operator from wasting time in helping the meter measure accurately.
Read our complete guide about the best Tyre pressure gauges.
Uses & benefits of the best automotive multimeters
Multimeters are used for tests. Always ensure that there is no current flowing through the components you are testing. This is a safety measure to prevent electrocution while testing. Multimeters are tested thoroughly and given a UL certification or similar by reputed bodies.
Continuity – Turn the dial on the multimeter to the continuity mode. Next, plug the probes into the ports. Place the other end on the electrical component you are checking. The probes send an electric current through this component. The output will be displayed on the multimeter. If the flow is continuous then the reading will remain zero or an audio alert will be emitted by the meter. If the flow is not continuous then it will point to 1 or OL for “open loop”.
Resistance – Now switch to the resistance function on the multimeter. Plug in the probes. Then set the range of resistance you want to check. If the readout does not indicate anything then set a lower range of settings. Keep adjusting it till you find a range where you get a reading. If it is “0” or OL this means the component offers no resistance.
Voltage – Testing voltage is very similar to testing resistance. Put the probe on each end of your component and wait for the reading. If necessary, adjust the voltage range on the multimeter.
There are several benefits of multimeters;
Measure electrical characteristics – These meters measure resistance, voltage, capacitance, current, etc.
Accurate readings – The response of your automobile depends on its electrical system. This system consists of the starter, battery, and alternator. The battery provides the power to the starter. The alternator provides energy to the battery to power the automobile. If any of these parts is not working correctly your car will not start or run correctly. The accuracy of measurements is very important in the running and longevity of the car.
Troubleshooting – You can use automotive multimeters on your vehicle and in your home. If an outlet won’t give power or the speakers don’t work – a multimeter will diagnose the problem.
Test the car battery – To have a battery die on you especially in difficult weather conditions can be prevented. Check your battery with a multimeter before starting your journey.
Diagnose issues with the system – If you have upgraded your car with a state-of-the-art sound system. There is a lot of electrical work involved. A good multimeter can assist you in making precise settings.
Engine diagnostics – Before you spend your hard-earned cash on diagnostic services use the automotive multimeter to check the issues. Some may be an easy fix and save you a lot of money.
Features on the best automotive multimeters
The best automotive multimeters are loaded with useful features. We have enlisted them for you to check out while buying your model.
Test electrical properties – The multimeter has 3 primary purposes. To test continuity which informs you that the parts of the car are continuous. If there is a break in the circuit you will need to replace the wiring.
It is used to measure resistance in fuses, ignition coils, and sensors. For instance, measuring the resistance in a headlight will determine if the part needs to be replaced.
Multimeters are used to measure voltage. For example, the bass subwoofers and the powerful amps of your sound system require certain voltage. The multimeter helps you determine if your battery can handle it.
Cables – Ensure you have the best quality cables for proper transmittance of current. In some cases, you may need a longer cable while in others a shorter one. The length depends upon the brand. But ensure that they are replaceable in case they develop a kink, malfunction or break. This way you don’t have to buy an entire set of a multimeter and cables.
Voltage limitations – The best automotive multimeters are rated high as they can handle 500 – 6000V. The circuits in your car may range from 12 to 24V but they are higher than you think.
Display – The LCD shows the functions, features, and related readings. Thus, the selling point of a multimeter will be clear, large, and backlit display and font. Some models can freeze the screen to record the data for later use. The display size will depend on the decimal places the multimeter is calibrated to display.
Auto-ranging – This feature gives you the ballpark of the readings before you begin. This feature helps you detect the type of voltage, current, and other input the operator may measure. This helps you diagnose and manipulate the circuit to optimize it.
True RMS – This feature gives the most accurate readings across measurements on your vehicle or device.
Overload protection – prevents electrocution.
Solid casing and rubber edges – are a practical feature as rubber is an insulator. Besides the delicate instruments in the multimeter are protected in case you drop it. The impact-proof cases increase the lifespan of the tool.
Safety rating – Some multimeters are rated CAT-IV 600V, CAT-III 1000V, etc. These multimeters do not explode due to the ceramic fuse tubes and other built-in protections.
Kickstands and magnets – These help free your hands to do the job. Simply kick out the stand and place the meter like a photo frame before you. The case can have a powerful magnet to stick the meter on the car’s metal body. Some models may have hooks or magnetic strips.
Battery life – The tool should have battery conservation features such as auto shut off. It should have a quick charge feature to cut out the downtime.
What parameters can a multimeter measure?
Consider your level of knowledge before getting a multimeter. They can be used to measure, AC/DC voltage, current, continuity, resistance, etc. If you are a professional then you will know to measure the capacitance and frequency too.
Are the multimeter readings accurate?
The accuracy is determined by the volume by which the reading is different from the input value. The multimeter requires to be calibrated to reduce this difference.
How to calibrate the automotive multimeter?
Set the meter on the highest resistance range. Turn the dial to the maximum “ohm” setting. Then touch the probes of the multimeter together. The reading should be “0” (ohms). If you do not see a zero then press the calibration knob until the display reads “0”.
How to measure current if the multimeter has different ranges?
Measuring current is difficult as electricity should be flowing through the meter. Select the right range to prevent damage to the tool. It takes approximately 400 amperes to start a car and about 1000 to start a truck. Set the range above these levels and test your way to an accurate reading.
Top 15 Best Automotive Multimeters in 2020
|Image||Product Name||Key Features||Rating|
|1. Fluke 88 V/A Kit||Measures capacitance||4.7|
2. Innova 3340
|3. Fluke 115||White LED backlight||4.6|
|4. Autel AL539B||Checks emission parameters||4.5|
|5. PDI DM-930||2-year warranty||4.5|
|6. OTC 3940||Auto-ranging||4.4|
|7. Autel Autolink AL539||Compatible with post-1996 models||4.4|
|8. Actron CP7677||Engine Analyzer||4.4|
|9. Meterk MK06||Tests Continuity||4.3|
|10.Klein Tools MM600||Digital Auto-Ranging||4.3|
|11. AstroAI 132A||Manual & auto-ranging||4.2|
|12. Crenova MS8233D||Resistance Test||4.1|
|13. KAIWEETS HT118A||180° viewing angle||4.1|
|14. Neoteck NTK017||Backlight LCD||4.0|
|15. Etekcity MSR-R500||Versatile tool||3.9|
This kit comes from Fluke Corporation, a Fortive subsidiary based in Washington. It manufactures diagnostic, industrial, and measurement equipment.
Fluke 88 V/A Kit consists of the automotive multimeter along with test probes, an inductive RPM pick-up probe, and other accessories. The meter measures continuity, resistance, and diodes. It measures the width of the millisecond pulse for the fuel injectors. It captures the peak minimum and maximum of intermittent events. These events may be as short as 250 microseconds. It measures the percentage duty cycle and frequency up to 200 kHz. It can handle up to 1000 volt in AC and DC and measure 10 and 20 amperes of current for up to 30 seconds. The display has a 6,000-count resolution. The 3.75mm digit digital display has a two-level white backlight to read the meter in dimly lit conditions. There is a 4.5-digit mode for precise measurements. It also displays analog bar graphs. It also measures RPM with an optional inductive pickup. The unit also measures temperature using the temperature probe. This cuts out the need to carry a separate instrument. There is a magnetic hanger for easy set-up of the tool and easy viewing of the reading. This feature frees your hands to do you work with ease.
Fluke 88 V/A Kit consists of a multimeter and accessories. The meter comes with improved measurement functions and troubleshooting features. The kit is sufficient to resolve most problems on all types of vehicles. This multimeter has all standard features to measure continuity, voltage, current, and resistance, etc.
Fluke 88 V/A Kit can measure DC and AC up to 1000 volts and current up to 10 amperes. It measures resistance up to 50 MΩ, capacitance up to 9,999 µF, and frequency up to 200 kHz. It describes a maximum duty cycle of 99.9% with an accuracy of 2% per kHz with a resolution of 0.1%. It can measure temperature in the range of -200.0°C to 1090°C or -328.0°F to 1994.0°F. It measures conductance 60.00 nS with an accuracy of ± (1.0% + 10) in the range of -20°C – 55°C. The meter measures 2.06 inches by 3.86 inches by 7.93 inches and weighs 22 ounces.
Fluke 88 V/A Kit consists of a multimeter, SureGrip silicone test leads, a SureGrip large jaw alligator clip set, test probes, and an inductive RPM pick-up probe. There is a ToolPak magnetic meter hanging kit. It has a universal hanger with a magnet and a 17-inch hanging strap. There are a temperature probe, two automotive back probe pins, and an insulation piercing probe. There is a carrying case, a holster, a 9V battery, instructions, and an instructional CD. The kit has a limited lifetime warranty.
- Measures voltage
- Measures current
- Measures capacitance
- Measures frequency
This is an automotive multimeter designed to point out the engine problems. The unit tests solenoids, duty cycles, diodes, wiring, switches, breakpoints, and more.
INNOVA 3340 has the auto shut off, auto-ranging, and overload protection. The model is safe and easy for everyone – novice or professional. It has 10 Megohm of input impedance which is safe for automotive and electrical use. It also prevents damage to the automobiles ECU. It measures up to 15 amperes while device testing. There is a minimum/maximum and hold button which makes it easy to retrieve data. It is used to measure the vehicle’s RPM using the inductive pickup. It gives specific measurements such as temperature, pulse width, frequency, dwell, RPM, and duty cycle. The unit has protective guards on the corners. They not only protect the delicate circuitry inside the device but also serve as drop protection.
INNOVA 3340 is very easy to use yet has a professional design. The unit is designed in such a manner that all the parameters are displays for diagnosis on the LCD screen. There is a large display with the information and readings displayed. The meter measures accurately with precision. It has durable leads to test various parameters in many applications. It has the RPM clamp and even tests the alternator diodes. If the meter has been idle for a long time it shuts off automatically.
INNOVA 3340 weighs 8 ounces. It is 12.5 inches by 4.5 inches by 6.5 inches.
INNOVA 3340 packet includes an RPM clamp, temperature probe, and carrying case. The unit is supported by a 1-year warranty.
- Professional-grade tool
- Overload protection
- Auto shut-off
This is a compact and true RMS digital multimeter for technicians. It is dependable and reliable with a CAT III 600V rating.
Fluke 115 measure the true RMS readings on non-linear loads. The unit is CAT III 600 V safety rated and has a large white LED backlight. The large fonts and backlight help you read the screen with ease. The models operating temperature is -10 °C to + 50 °C while the storage temperature is -40 °C to + 60 °C. The meter helps you measure the capacitance, continuity, frequency, and the diode test. It measures 20 amperes, 30-second pulses, and 10-ampere continuous ones.
Fluke 115 is meant for testing electrical and electronic devices. It is a dependable tool for troubleshooting. It records minimum, maximum, and average of signal fluctuations. It has a simple one-hand operation and a large backlit display which is easy to read. It finds a wide application in fields where electronics are used. It measures the true RMS voltage and current with a 6000-count resolution. It even measures frequency, resistance, capacitance, and continuity. It measures DC and AC voltage up to 600V and current up to 10 and 20 amperes with an overload of 20-second maximum. It measures capacitance, frequency, resistance, and continuity. It also gives reading on the maximum, minimum, and average of the recorded fluctuations, and the time elapsed. The holster has probe holders that allow one-hand operations. There is a white LED backlight so you can read the meter even in dark places.
Fluke 115 measures AC and DC volts in the range and resolution of 600.0 mV / 0.1 mV. It measures the continuity in the range and resolution of 600 Ω / 1 Ω. It measures resolution in the range and resolution of 600.0 Ω / 0.1 Ω. It tests diode in the range and resolution of 2.00 V / 0.001 V. It measures capacitance in the range and resolution of 1000 nF / 1 nF. It measures Lo-Z capacitance in the range of 1 nF to 500 μF. The AC amperes and true RMS between 45 Hz to 500Hz is measured in the range and resolution of 6.000 A / 0.001 A. The DC amperes are measured in the range and resolution of 6.000 A / 0.001 A. The Hz (V or A input)2 is measured in the range and resolution of 99.99 Hz / 0.01 Hz.
Fluke 115 multimeter is supported by a limited lifetime warranty.
- Measures true RMS
- White LED backlight
- CAT III 600 V rated
- Tough protective casing
This multimeter comes from Autel – the leading supplier of diagnostic equipment, accessories, and tools. They maintain strict quality control standards to meet demands internationally.
Autel AL539B multimeter features the patented One-click I/M readiness key. This feature checks for the drive cycle verification and state emissions readiness check. The AVOmeter checks the current, continuity, and voltage. The unit diagnoses 12 volt starting systems, charging systems, and discharged batteries. The unit also offers an accurate and quick load-free testing for most 12-volt batteries such as the standard, AGM, and maintenance-free batteries. The model is not only an OBD2 code reader but also a battery tester with an AVOmeter. You can access the information on current, voltage and continuity and the battery status of the vehicle. The OBD2 is meant for emission-related diagnosis, O2 sensor test, and I/M readiness check.
Autel AL539B will work on automobiles built after 1996 including OBDII and CAN -domestic and imported automobiles. The Onboard Diagnostics 2 (OBD2) is a standardized system in automobiles. It is mainly used for self-diagnostics. This software regulates and monitors the vehicle’s main functions. It sends commands to various systems to maintain the automobile’s overall health. For quicker diagnosis, the code reader on the meter supports the DTC lookup. This is for detailed information retrieval with a data playback and print capability. It will give you a clear picture of the vehicle’s health.
Autel AL539B has a TFT color display of 320 x 240 dpi resolution. The unit operates between 0 to 60°C or 32 to 140 F° the storage temperature is -20 to 70°C or -4 to 158 F°. The unit is 6.91 inches by 3.8 inches by 1.46 inches and it weighs 1.82 pounds with the wires.
Autel AL539B package arrives with the CCA main cable, main cable, a code reader, the probes, a mini USB cable, a CD, and user manuals. The unit is supported by a 1-year warranty.
- Tests batteries
- Tests circuits
- Checks emission parameters
- Quick diagnosis
Precision Diagnostic Instruments was established in 1995. The company manufactures test equipment for HVAC/R, electronic and automotive professionals.
PDI DM-930 is the next step in the innovation and development of automotive meters. It combines accuracy and range with durability. The model has an impact-resistant and dustproof case. The unit can measure AC/DC voltage, current, temperature, RPM, frequency, capacitance, resistance, %Duty Cycle, %Duty Cycle, width, ms-pulse, and test diodes. The unit also has hold, peak, maximum and minimum functions that help the technician service the high-tech vehicles of today.
PDI DM-930 multimeter is used to measure various parameters related to electricity. The way scales are used to measure distance, a stopwatch is used to measure time, and weighing scales are used to measure weight. But a multimeter is a multi-tool that can be used to measure many things. There is a knob in a dial that can be turned to select the function you want to measure.
PDI DM-930 has a digital display count of 4000. It measures the voltage in AC and DC up to 600V and resolution of 0.1mV. It measures AC and DC of 20 amperes with a maximum resolution of 10µA. The resistance is measured up to 40MΩ with a maximum resolution of 0.1Ω. The capacitance can be measured up to 40mF and 1pF and frequency up to 40MHz and resolution of 1Hz. The temperature can be measured in the range of -22°F to +1832°F with the resolution of 1°F or -30°C to +1000°C and resolution of 1°C. It has a duty cycle of 0.5% to 99.0% with a maximum resolution of 0.1%. The pulse width is 1 to 20 ms with a maximum resolution of 0.1ms. The Diode test is 1.0mA RPM with a maximum resolution of 1 RPM. The dwell angle can be measured between 0 to 90° with a maximum resolution of 0.1°.
PDI DM-930 kit has a premium set of test leads, alligator clip tips, inductive pickup (RPM), K-type thermocouple, K-type adapter, and a soft side carry-bag. The unit is supported by a 12-month warranty.
- Measures voltage
- Measures capacitance
- Measures duty cycle
- Reads correct RPM
OTC tools is a designer, manufacturer, and supplier of electronic diagnostic tools. Their parent company is Bosch.
OTC 3940 belongs to the 500 series which features automotive test functions such as duty cycle, frequency, continuity, and diode tests. It has all the other standard features expected on the professional-grade meter such as auto-ranging, data hold, auto power-off, and relative change.
OTC 3940 in the automotive business to check car problems. These devices are also known as Volt-Ohm meters (VOM). It is used to measure the current, voltage, and resistance. While the resistance prevents the current from flowing the voltage pushed or facilitates the flow of current. You can test your car battery, test the alternator, check the wires to the speakers, the ohms on the subwoofer, etc. You can use it to run diagnostics on airflow meter, check the coolant temperature sensor, the fuel temperature sensor, the camshaft position sensor, etc.
OTC 3940 measures frequency between 1Hz to 10MHz ± 0.1%. It measures the Duty Cycle between 0.1% to 99.9% ± 2.5%. It reads DC Volts ranging from 400mV / 4 / 40 / 400V ± 0.5% and 1000V ± 0.8%. It read AC Volts ranging from 4 / 40 / 400V ± 0.8% and 400mV / 750V ± 1.2%. The unit measures DC Amps ranging from 400 / 4000μA ± 2%, 40 / 400mA ± 1.5%, 4 / 10A ± 2%. And AC Amps ranging from 400 / 4000μA ± 2.5%, 40 / 400mA ± 2%, 4 / 10A ± 2.5%. The resistance is 400Ω / 4 / 40 / 400kΩ ± 1%, 4 / 40MΩ ± 2%. The capacitance is 40nF ± 3.5%, 400nF / 4μF / 40μF ± 3%, 400μF / 4000μF ± 20%. The dimensions are 17.7cm by 8.8cm by 3.9cm.
OTC 3940 comes with the probes and the device is supported by a 1-year warranty.
- Data hold
- Auto power off
- Diode test
This is a multi-purpose device with an On-Board Diagnostic scanner and multimeter. It is a diagnostic tool and other features.
Autel AutoLink AL539 has a Thin Film Transistor (TFT) color display. There is a built-in speaker on the streamlined design. The model delivers an accurate and rapid diagnosis for timely repairs. The model has an On-Board Diagnostic feature reads codes and erases them. I receive live data and have a freeze-frame feature. There are O2 monitoring and I/M readiness. It checks components and verifies vehicle information. It supports live data streaming, playback, and graphing. The enhanced OBD II mode 6 helps data printing via a laptop or desktop. The models are compatible with all models made after 1996. The smart AutoVIN technology helps identify vehicles.
Autel AutoLink AL539 is designed to check the vehicle’s electrical systems such as the current test, continuity test, voltage tests for AC and DC. It diagnoses the cranking status to check if the starter voltage is normal. It checks the charging system if there is excessive ripple, low, high, or normal output. The OBD scanner can tell you about your emission rate and if you will pass the smog test. The I/M readiness check and the O2 sensor test inform about other emission-related problems.
Autel AutoLink AL539 has a 320 x 240 dpi TFT color display. The unit’s operating temperature is 0 to 60°C or 32 to 140 F° and the storage temperature is -20 to 70°C or -4 to 158 F°. The unit is 6.91 inches by 3.8 inches by 1.46 inches and it weighs 1.82 pounds.
Autel AutoLink AL539 has a 12-month warranty. The package contains a code reader, probes, main cable, a mini USB cable. There are a carry case and a user manual.
- Tests all systems
- On-board diagnostics
- Compatible with post-1996 models
- Tells emission status
This is an auto troubleshooter, an engine analyzer, and a multimeter suitable for use by professionals and DIYers.
Actron CP7677 can test charging and starting, fuel delivery and ignition systems. It can locate faulty components and wiring. The unit has an easy to read LCD with extra-large digits on the screen. The on-screen test has a leads connection reminder. There is an automatic reverse polarity indication. The unit has an automatic zero adjustment, overload protection for all ranges. There is a low battery indicator, (V power, 10M input with an audible tone, and auto power off. The unit includes a diode check, tach, and continuity function.
Actron CP7677 will help you troubleshoot as this versatile multimeter can do continuity tests, check AC/DC Voltage, current, and resistance. The unit does diode tests, measures RPM, and dwell angle too. This is a digital multimeter with an easy to read large display. The engine analyzer does all tests such as measure ohms, volts, tach, dwell and diode It has a fold-out stand with a lead holder for convenient use and storage.
Actron CP7677 measures DC Volts between 200mV – 1000mV and AC Volts between 2V – 750V. It measures DC Amperes between 200mA – 10A and resistance in ohms between 200Ω to 20MΩ. It is useful on 4, 6- and 8-cylinder dwells. The unit is 2 inches by 6 inches by 10 inches.
Actron CP7677 includes a fold-out stand, protective boot, alligator clips, color-coded test leads, and instructional manuals. The unit is supported by a 12-month warranty.
- Engine Analyzer
- Digital Multimeter
- UL and ETL listed
- Fold-out stand
The brand makes power tools, electrical testing, measurement, and inspection tools.
Meterk MK06 is a clamp meter that will test capacitance, current, AC-DC voltage, frequency, and diodes. This clamp meter has a large LCD screen and can be used in the garage, field, laboratory, and home applications. The unit is lightweight has a backlight screen and an auto-identify feature. The backlight LCD helps you read the meter in dimly lit areas. The multi-functional socket measures transistors and capacitors. You can push the “hold” button and freeze the readings on the screen. This makes it easy to record data. There is overload protection with a double fuse built-in to the meter. It functions overall ranges
Meterk MK06 is a multipurpose clamp meter that covers all ranges. It can measure the voltage, current, duty cycle, diode, capacitance, resistance, and resistance in AC and DC circuits. It has the NCV ad live line test function for non-contact voltage detection. There is a sensor that detects voltage this prevents electrocution without any wires connecting.
Meterk MK06 can measure AC and DC Current between 40A/400A ± (3.0%+6). It measures AC Voltage between 4V/40V/400V/600V ± (1.2%+10) and DC Voltage between 400mV/4V/40V/400V ± (0.8%+2) and 600V ± (1.0%+2). It measures the resistance between 400Ω/4KΩ/40KΩ/400KΩ/4MΩ ± (0.8%+2) and 40MΩ ± (1.0%+2). The capacitance is measured from 40nF/400nF/4μF/40μF/100μF ± (3.0%+10). The frequency is read between 50Hz-100KHz ± (1%+2). The duty ratio is measured in the range of 0.1-99.9% ± (3%+3) and the NCV Test Pencil functions ≥90V for AC Voltage. The working temperature is between 0 to 40°C and the storage temperature is -10 to 60°C.
Meterk MK06 is a clamp multimeter fitted with an alkaline battery. There are two test leads, three AAA batteries, and a user manual. The meter is supported by a 2-year warranty.
- Non-contact voltage detection
- Overload protection
- Tests Continuity
Klein Tools is an Illinois based company that makes hand tools, for telecommunication and electrical industries.
Klein Tools MM600 is a CAT III 1000V and CAT IV 600V safety rated multimeter. It is waterproof rated IP42 and can withstand a drop of 2 meters. The tough casing can withstand the wear and tear on a job site. There is a low battery indicator. You can also replace the battery and the fuse replacement compartment.
Klein Tools MM600 is a multimeter that can measure up to 1000 volts in AC and DC. It measures up to 10 amperes of current in AC and DC. It measures other parameters such as frequency, capacitance, temperature, duty cycle, continuity, and diodes. The duty cycle is the time period for which a load or a circuit is switched on in comparison to the time it is off. The parameter is also called Duty Factor and is expressed in percentage of the time the circuit was on. For example – 70% duty cycle means that the signal is ON, 70% of the time, and OFF for 30% of the time. Continuity indicates the complete path of the current. In the test, the multimeter sends small pulses of current through the circuit and measure the resistance in it. The unit can be used in environments with electromagnetic radiation.
Klein Tools MM600 requires 2 AAA batteries. It has an ingress protection rating of IP42. It has a 4000 count for LCD and functions between 0° to 1000°F or -18° to 538°C. It measures voltage up to 1000V AC and DC. Besides the Frequency (1Hz – 500 KHz), Current (10A AC; 10A DC), Capacitance up to 1000µF, and resistance up to 40 Megaohms. The unit is 7 inches by 2.09 inches by 3.55 inches and weighs 14.4 ounces.
Klein Tools MM600 package includes alligator clips, test leads, thermocouples, adapters, batteries, and carrying pouches. The unit is supported by a 1-year warranty.
- HVAC Multimeter
- Digital Auto-Ranging
- Measures standard parameters
- Waterproof & EM protection
This is a True RMS 4000 count voltmeter. It is a dual functional with manual and auto-ranging features. There are voltage and diode tester. It measures frequency, resistance, current, temperature, and continuity.
AstroAI 132A has a red case with a black panel. It is fitted with a black dial and orange buttons. There are three jacks to fit the leads – two red and one black. There is a large backlit LCD that makes letters visible. There is a hold function that makes the data visible. There is a low battery indicator that informs you of the charge on the unit. There is an automatic shut on that activates after 15 minutes of inactivity. Your meter gets full support and is always protected. There is a prop-up stand on the meter that makes reading it easy. There is a rubber sleeve to protect the meter from wear and tear.
AstroAI 132A is designed for the safety of the professionals and the accuracy of results. It can be used in commercial settings and by DIYers. It has standard and advanced features that count the true RMS at 4000 counts. You will troubleshoot all the electrical problems in your automotive system with manual and auto-ranging. The unit comes with anti-burn and double protection. There are built-in F10A/600V and F500mA/600V explosion-proof ceramic fuse tubes. This double protection of the integrated fuses is reliable and securely designed with safety in mind. For the continuity test connect the leads to the 2 points on the circuit that is being tested.
AstroAI 132A has a 3999, 3.75 digital display. The LCD size is 55 mm by 31 mm. The sampling speed is two times per second. And the range selection is between Auto and Manual. It has a polarity, overload, and low battery indicators.
AstroAI 132A package contains the multimeter, test leads, K-type thermocouple, and user manual. The unit is supported by a 1-year warranty.
- Measures True RMS
- Tests diodes
- Manual & auto-ranging
This is an auto-ranging tool with a backlit display. The unit has a data hold, a maximum value hold, a backlight, an auto power off and low battery indicator.
Crenova MS8233D has a backlight LCD that has a clear display even in dark places. The data hold feature records the measurement when you press the “hold” button. This feature locks the screen for you to note the readings. There is a foldable stand that helps stably prop the meter. There is overload protection through all ranges. There is a 3.5-digit LCD with a backlight that helps reading the screen in low light. The model has a built-in double fuse, overload protection overall ranges. There is maximum value hold, data hold, function switching, auto power-off features. The screen is renewed three times per second.
Crenova MS8233D is a battery-operated handheld digital multimeter with many functions. The model is designed to measure the AC/DC voltage, current, continuity, diodes, resistance, and frequency. The model meets the CAT II 600V and IEC61010-1 features. It has double insulation and over-voltage protection. It has an auto-ranging operation that helps you select the right range of measurements while working with various components. This is a measurement tool for various applications. professionally and at home.
Crenova MS8233D measures DC Voltage between 200mV/2V/20V/200V ± (0.5%+2) and 600V ± (0.8%+2). It measures AC Voltage between 2V/20V/200V ± (0.9%+3) and 600V ± (1.2%+3). It measures AC and DC ranging from 200μA/2000μA/20mA/200mA/10A ± (1.5%+3). It measures resistance from 200Ω/2kΩ/20kΩ/200kΩ ± (0.8%+2) to 2MΩ/20MΩ ± (1.0%+2). It measures frequency up to 20kHz ± (1.5%+5). It requires a 9-volt battery. It is certified in the class of CAT II 600V and IEC 61010-1.
Crenova MS8233D pack consists of a multimeter, the test leads, the alligator clips, and a 9V battery. The unit is supported by a 1-year warranty.
- AC/DC Voltage Test
- Battery Test
- Resistance Test
- Rubber casing for protection
KAIWEETS Direct is focused on bringing safe, compact, and durable tools to every user. They make NCV voltage testers, test leads, and multimeters. Their products are easy to use and safe.
KAIWEETS HT118A finds wide application as it measures capacitance, frequency, current resistance, temperature, etc. It has 6000 counts and an auto-ranging feature to make accurate measurements. It can check the circuits, battery life, etc. too. The unit is easy to operate just turn the dial and LED lights on the jack turn on accordingly. Simply plug in the leads and get the reading off the 2.9-inch lit display – in numbers and graphs. There is a flashlight on the back to illuminate dark and dimly lit places. There are a pen slot and a kick-out stand on the back for handsfree use.
KAIWEETS HT118A is a multifunctional tool for non-contact voltage testing. They have a live function with a sound and light alarm. The screen turns red on detecting a live wire. There is a low battery prompt besides maximum/minimum data and data retention. You are safe using this auto-ranging tool as it is RoHS certified, CAT IV 600V, CE & CAT III 1000V certified, and IEC Rated. It is also anti-burn certified due to the double ceramic fuse and thermistor protection. This is a double insulated unit with a silicone protective case for protection from wear and tear.
KAIWEETS HT118A carries CAT IV 600V, CATⅢ 1000V, IEC-61010-1, and double protection. It has a true RMS 6000-count and 3.833 digit and an overload display. Measures DC Voltage between 600mV/6V/60V/600V± (0.5%+3) and 1000V ± (0.5%+3). And AC Voltage from 600mV/6V/60V/600V/750V± (0.8%+5). It measures the DC between 600μA/6000μA/60mA/600mA/10A± (1.2%+3) and AC Current from 600μA/6000μA/60mA/600mA/10A± (1.5%+3). It measures the resistance between 600Ω/6KΩ/60KΩ/600KΩ/± (1.0%+3) and 6MΩ/60MΩ ± (1.5%+3). And capacitance between 10nf/100nf/1000nf/10uf/100uf/1000uf± (4.0%+5) and 10MF/100MF± (5.0%+5). It measures the frequency and duty between 10Hz/100Hz/1000Hz/10kHz/100kHz/1000kHz ± (1.0%+3) and 10MHz/± (3.0%+3).
KAIWEETS HT118A kit includes the K-type thermocouple, batteries, and instruction manual. The model is supported by a 36-month warranty.
- HTN full-viewing screen
- 180° viewing angle
- Two LED backlights
- White backlight changes color
This is an auto-ranging multimeter with a digital display. The unit measures frequency, capacitance, resistance, current, voltage, and diodes. This tool has a backlit LCD, auditable continuity, and a multitester feature.
Neoteck NTK017 multimeter has an input terminal a backlit display, a function knob, and a pair of test leads. This is a 2000 counts digital multimeter that measures the capacitance of 2000μF and frequency at 200KHz. It also measures the voltage, Current, Resistance, and much more There is a maximum reading over time, a continuity buzzer and an auto-ranging feature. There is a protective shell and stand built into the model. There are a non-slip soft plastic case and a stand that kicks out at 45 degrees. This makes it easy to use the meter handsfree.
Neoteck NTK017 is a CE rated multimeter with overload protection. You can safely trouble-shoot a great variety of household and automotive circuits. The unit has a large internal resistance and high input impedance. Besides, there is induced voltage interference when the circuit is open. There is DC and AC gear that will jump when it is switched on but this will not affect the measurement. When you turn on the meter turn the dial to OL which is it’s normal. It means – the infinity of resistance.
Neoteck NTK017 can measure DC voltage of 200mV/ 2V/ 20V/ 200V ± (0.5%+2) and 600V ± (0.8%+2). And AC voltage of 2V/ 20V/ 200V ± (0.9%+3) and 600V ± (1.2%+3). It measures DC current of 200uA/ 2000uA/ 20mA/ 200mA/ 10A ± (1.5%+3) and AC Current of 200uA/ 2000uA/ 20mA/ 200mA/ 10A ± (1.5%+4). It measures resistance from 200ohm/ 2Kohm/ 20Kohm/ 200Kohm ± (0.8%+2) and 2Mohm/ 20Mohm ± (1.0%+2). It measures Frequency [0.1-200kHz (±1%+2)] and Capacitance [4-2000uF (±4.0%+5)]. It can check diodes up to the resolution of 0.001V. The continuity check measures resistance less than 100Ω. The buzzer is sounded loud and clear.
Neoteck NTK017 pack includes 2 test leads, 2 banana plugs to alligator clips, a user manual. The unit is supported by an 18-month warranty.
- Pocket digital meter
- Backlight LCD
- Shell with stand
This is a digital multimeter that measures ohms, volts, amperes, etc. It tests diodes and continuity.
Etekcity MSR-R500 is full of features such as the Hold-It feature that records measurements. The display lights up making it easy to read the meter in dark areas. There is a kick-out stand that supports the meter while you work handsfree. The rubber sleeve protects you from electrocution and the unit from an accidental drop. The unit is ideal for automotive maintenance and testing wires, batteries, and fuses. DIYers and hobbyists can use the unit to check wall outlets, spikes, dead batteries, etc.
Etekcity MSR-R500 is an ideal tool for electricians, hobbyists, mechanics, etc. It can be used for general household use too. This is a manual ranging tool with a dial. Simply turn the dial to select the function you want to measure. It is perfect for a student of electronics and electrical engineering and professionals who like manual settings. There is a continuity buzzer to test if your components are still in a working condition. The unit carries an overload protection low battery indicator, removable lead extension caps, and rubber sleeves.
Etekcity MSR-R500 meets the safety compliance standards such as IEC61010 CAT I 600V, double insulation, CAT II 300V, etc. There is a 1999, 3.5 digits maximum display. The unit has manual ranging and an overload display. It samples twice per second and requires a 9V battery. It tests DC Voltage at 200mV/2000mV/20V/200V ± (0.5%+2) and 500V (0.8%+2) and AC Voltage at 200V/500V ± (2%+10). It measures DC between 2000μA/20mA ± (1%+2) to 200mA ± (1.2%+2), 10A ± (2%+5). It measures the resistance between 200Ω ± (0.8%+5), 2000Ω/20KΩ/200KΩ ± (0.8%+2) to 20MΩ ± (1%+5), 200MΩ ± [5%(reading-10) +10] It has a Square Wave Output and tests diodes and continuity. The unit is 5.1 inches by 2.9 inches by 1.4 inches.
Etekcity MSR-R500 pack has a multimeter, two test leads, a GP Supercell 6F22 9V Battery, and a User’s Manual. The unit carries a 1-year warranty.
- Digital display
- manual ranging
- protective cover
- Versatile tool